Ok,I dropped my sr motor in the car,And I took the nut off the motor mounts so i can adjust them back and forward.So how did you guys get the motot stright after its in the car,It sitting a little sideways,I got the transmission crossmember all bolted up.Sould i just lift the motor alittle,And just eyeball it to make it stright.OR is there a better way.
-Thanks,
Getting the motor stright need some help.
Re: Getting the motor stright need some help. (9240sx)
That how it sits. Looking like it leaning to one side.
-
9240sx
- Posts: 2676
- Joined: Wed Dec 10, 2003 4:06 am
- Car: What i believe to be the cleanest s13 in the world.
SR20DET + RS*R-Apexi-Nismo-Trust-HKS= 100% pure love - Location: New Mexico
Re: Getting the motor stright need some help. (robbbby)
The oil pan isnt straight with the sway bar.
-
boost_creep
- Posts: 838
- Joined: Sat Jul 31, 2004 10:45 am
- Car: 92 sr powered coupe,06 Spec V
-
UsedToOwn240SX
- Posts: 240
- Joined: Thu Feb 20, 2003 5:32 pm
- Car: Radio Control Racing, Counterstrike
Re: Getting the motor stright need some help. (9240sx)
The engine does tilt to the side a little. Here's a pic of my engine.
-
mynameisjonas
- Posts: 148
- Joined: Mon Jul 14, 2003 10:42 am
Re: Getting the motor stright need some help. (9240sx)
did anybody take the oil pan off and maybe put it on backwards? i'm in the process of installing my sr, the oil pan sits parallel to the sway bar.
Re: Getting the motor stright need some help. (Silvia007)
Not meaning to hijack the thread but , Silvia007 I'm digging the blacked out intercooler with the GReedy logo. Very cool.
Yeah, and the motor is at a slight tilt.
Yeah, and the motor is at a slight tilt.
-
AkademikONE
- Posts: 1786
- Joined: Sat Dec 14, 2002 6:55 pm