Getting My Motor Shipped.

Post by **PROJECTRB240SX** » Wed Nov 19, 2003 8:54 am

MY RB30DET SHOULD BE COMING FROM AUSSIELAND SOON.

GOTTA SELL THE RB20DET LONGBLOCK AND THE RB25DE CRATE MOTOR. THEN I'M GOING TO HAVE TO SELL THE RB20DET OUT OF MY CAR.

Post by **rbsileighty** » Wed Nov 19, 2003 8:54 am

Sounds good man. I am stoked for you!

Post by **PROJECTRB240SX** » Wed Nov 19, 2003 8:54 am

DID YOU GET MY EMAIL?

Post by **rbsileighty** » Wed Nov 19, 2003 8:54 am

No. Sorry bud, I am at work right now and there is some kind of block on hotmail here.

Post by **PROJECTRB240SX** » Wed Nov 19, 2003 8:54 am

OK, IT WAS ABOUT THE HEAD... YOU CLEARED IT UP FOR ME THOUGH. I STILL NEED TO FIND A HEAD CAUSE I'M GETTING A BLOCK AND BELT.

Post by **HybridOne** » Wed Nov 19, 2003 8:54 am

oooo congrats. i have another project car (a gutted 95 S14 with rollcage) that is in desperate neet of an RB30. You will have to let me know how your frankenstien build goes.

Post by **rbsileighty** » Wed Nov 19, 2003 8:54 am

Yeah, Hybrid and I were planing on making the 95 our shop drag car with a 30/25 hybrid in it.

Good luck with the head, they should be able to take car of you, and if not point you in the right direction to finding one.

Post by **95silvia** » Wed Nov 19, 2003 8:54 am

I may be able to help you with the the rb25de non vvt head email me at [email protected] BTW if the head looks brand new how much are you looking to spend?

Post by **Phat_Optimo** » Wed Nov 19, 2003 8:54 am

Are the Rb30et's internals Forged? Are you going to rebuild it?

Post by **PROJECTRB240SX** » Wed Nov 19, 2003 8:54 am

IT WILL BE COMPLETLY REBUILT WITH FORGED PISTONS AND CRO-MOLY RODS, RB26 OIL PUMP, NEW RB30 WATER PUMP, I MAY TAKE THE PISTON SQUIRTERS FROM A RB20 AND PUT THEM IN THE RB30, AND THERE ARE A FEW OTHER THINGS I'LL BE DOING.

Post by **JeffTN** » Wed Nov 19, 2003 8:54 am

So are you recieving a hybrid motor that has already been put together or are you recieving the RB30ET (single cam)?

Also, who did you get it from and how much is shipping?

Post by **rbsileighty** » Wed Nov 19, 2003 8:54 am

PROJECTRB240SX wrote:IT WILL BE COMPLETLY REBUILT WITH FORGED PISTONS AND CRO-MOLY RODS, RB26 OIL PUMP, NEW RB30 WATER PUMP, I MAY TAKE THE PISTON SQUIRTERS FROM A RB20 AND PUT THEM IN THE RB30, AND THERE ARE A FEW OTHER THINGS I'LL BE DOING.

I would highly recommend using the oil squirters. The cooling advantage would be well worth it.

Post by **2fast4j00** » Wed Nov 19, 2003 8:54 am

Datz tight that your getting a rb30. I was thinking about getting that engine but I got a rb26 instead. Where do you get replacement parts for that engine though? Are they hard to find? Aussie?

Post by **PROJECTRB240SX** » Wed Nov 19, 2003 8:54 am

AUSTRAILIA.... BUT IT WILL HAVE A RB25DE HEAD HOPEFULLY. I HAVE A CONNECTION TO GET ANY FORGED PISTONS AND RODS FOR $1500 WITH PINS, RINGS, AND ROD STUDS. WATER AND OIL PUMPS ARE INTERCHANGABLE ACROSS THE RB BOARD.... THE RB26 IS AN UPGRADE THE RB25 IS THE SAME, I DON'T KNOW HOW THE RB20 HOLDS UP. GASKETS ARE THE RB25.

Post by **JeffTN** » Wed Nov 19, 2003 8:54 am

Who is importing it for you?

Post by **easymmkay240sx** » Wed Nov 19, 2003 8:54 am

Are you going to sell the RB20 that's in your car as a full swap? If so I'd be interested :>

let me know, email me at [email protected]

Post by **PROJECTRB240SX** » Wed Nov 19, 2003 8:54 am

YEAH, I WILL BE. I'M ACTUALLY GOING TO GO WITH MCKINNEY FOR AND INSTALL KIT SO I CAN GET AS MUCH CLEARANCE AS POSSIBLE, CUSTOM SHAFT, transmission, ETC. I HAVE A RB20DET SWAP (NO ACCESSORIES), RB20DET LONG BLOCK, RB25DE COMPLETE CRATE ENGINE (NO ACCESSORIES), AND VARIOUS OTHER STUFF. THE RB20DET LB AND RB25DE IS AVAILABLE NOW.

AS FOR THE IMPORTING QUESTION: I HAVE A CONTACT THAT'LL BRING IT IN FOR ME. IF YOU ARE INTERESTED I'LL GIVE YOU HIS INFO.

Post by **JeffTN** » Wed Nov 19, 2003 8:54 am

Yea, drop me an email with the info you have. [email protected]

Are you on AOL much in the evening? I would like to talk more.

Post by **PROJECTRB240SX** » Wed Nov 19, 2003 8:54 am

NAH I'M ONLY ON THE COMPUTER AT WORK, I'M ALWAYS OUT AT NIGHT.... IF I'M AT MY FRIENDS HOUSE TONIGHT I SHOULD BE ON AT SOME POINT. AIM: PROJECTRB240SX

Post by **PROJECTRB240SX** » Wed Nov 19, 2003 8:54 am

BTW... EMAIL SENT.

Post by **PROJECTRB240SX** » Wed Nov 19, 2003 8:54 am

REPLY EMAIL SENT.

I AM GOING TO SET UP AND ENTIRE PRICING MATRIX FOR YOU... INCLUDING MY LABOR IF YOU WOULD LIKE TO GO THAT ROUTE.

Post by **JeffTN** » Wed Nov 19, 2003 8:54 am

You are making this too easy. :ylsuper

Also, I would be wanting a factory service manual for the 25/26 and 30. I read in a post somewhere that you got one for a r32, and I was wondering where you got it from, how detailed it is and if its in English?

Post by **PROJECTRB240SX** » Wed Nov 19, 2003 8:54 am

The r32 manual is just the engine service manual so it lacks alot and is far from worth the $150 I payed for it, yes it was in english. I could possibly get a rb30 fsm for you, i'll look into it.

Post by **AlienHead** » Wed Nov 19, 2003 8:54 am

I'm just curious when or how long you've been at this project?, are you aware of the guys over in chicago they have a fully built RB30 with twin cam head conversion in a S13 it's pulled apart right now for some new goodies but I just think it's cool that there may be actually two of these things now.

Post by **IvoryJ30t** » Wed Nov 19, 2003 8:54 am

i have the r32 service manual in english. its in pdf format, 804 pages, 23 megs. if you have broadband, ill transfer it to you.

Post by **IvoryJ30t** » Wed Nov 19, 2003 8:54 am

and it covers the whole car, not just the engine.

Post by **JeffTN** » Wed Nov 19, 2003 8:54 am

I found that 24meg r32 .pdf manual on sklyinesaustralia and downloaded it. Thanks though.

Post by **IvoryJ30t** » Wed Nov 19, 2003 8:54 am

yup, thats it.

Getting My Motor Shipped.

Getting My Motor Shipped.

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums