gear swap

ONLY for ADVANCED technical discussion about the 240sx!
irax
Posts: 841
Joined: Sun Jan 04, 2004 10:04 pm
Car: VQ35DER Powered S14.3

Post

i was wondering, since i have a spare 5speed laying around not doing anything, would it be possible to switch out the 5th and 6th gears from a 300zx with the 4th and 5th gear from an s13 240sx? or is there any place i can get tall gears for the ka24de transmission


irax
Posts: 841
Joined: Sun Jan 04, 2004 10:04 pm
Car: VQ35DER Powered S14.3

Post

wth ??? it said some one replied... i remember replying to what they said, and now some one else replied but alas there post isnt...???

IveBeenBad
Posts: 1138
Joined: Sun Jan 12, 2003 11:53 am
Car: 1990 Nissan 240SX Fastback STOCK BIOTCH

Post

why do you want to modify the 4th and 5th gears? why not just modify the final drive?

IvoryJ30t
Posts: 3076
Joined: Sun Aug 17, 2003 1:36 pm
Car: 95 Maxima GLE, 95 Maxima GXE

Post

i replied, but due to an earlier incident, the posts were lost.

the 300zx never had a 6 speed, only a 5 speed. the transmissions are different between the 300zx and 240sx, ruling out a direct gear swap

basically, you want the rear diff from a 90-96 Q45 [3.58 viscous lsd, as opposed to your 4.08 open diff]

in order to use it, you will most likely need the output shafts from a 95-97 J30

irax
Posts: 841
Joined: Sun Jan 04, 2004 10:04 pm
Car: VQ35DER Powered S14.3

Post

ohh ok..i thougth the internals of the 300zx and silvia/240 were simular or the same... so then a gear swap from s15 would be out of the question too ? because i kno the internals on those trannys are the same.. well the 5speeds are anyways

and the reason i wanna modify just the last 2 gears is because i like the acceleration of the first 3 gears and if i swap out the final drive gear that lowers acceleration of all gears (or raises it depending on the gear) i just want it to be the "im not racing" transmission for like long trips so i get more fuel effency

i mean if in 6th gear i did 60 mph at 2000 rpms would i be getting better milage then 60 at 3500 rpm ?


Return to “240SX Technical Forum”