Post by
philipa_240sx »
https://forums.nicoclub.com/philipa-240sx-u68765.html
Mon Mar 10, 2008 9:27 am
Hope this helps everyone out. See attached pics. The removal tool is nothing more than a wide flat blade (ie. putty knife). Cover it with some electrical tape to prevent scratches. Pry from the front (closest to the HVAC controls), the rear is held by pawls which can break if forced.
Hint: Get the FSM and you will get this and just about every bit of info on serviceing and repairing the Rogue.
Image copyright Nissan USA