gas pedal covers

Forum for Infiniti M35 and M45, and Nissan Fuga owners.
tarheelcurt
Posts: 12
Joined: Thu Nov 05, 2015 7:13 am
Car: 2006 Infiniti m35x

Post

where can I find some gas pedal covers for my 2006 Infiniti M35x, I have checked on Ebay and Amazon, but they only have them for a G series


Larz
Moderator
Posts: 2894
Joined: Thu Feb 21, 2013 8:55 pm
Car: 2019 Q70-L RWD
Location: Ft Lauderdale, Florida
Contact:

Post

I found the following:
OEM pedals: http://www.ebay.com/itm/2006-2007-Infin ... f0&vxp=mtr

The pedals I use: http://www.ebay.com/itm/Alloy-Foot-Rest ... RX&vxp=mtr

If you just want new rubber covers, or to teplace the accelerator pedal, etc:
https://www.infinitipartsonline.com/ has OEM parts at prices considerably less than dealer prices. I but all my OEM parts there.

airmanhoward
Posts: 223
Joined: Mon Dec 29, 2008 4:16 pm
Car: 12 M37-Current
08 civic lx sold
06 M35x Totaled
2000 S10 sold
Ford contour svt-sold
91 caprice-sold
90 & 93 maxima-sold
96 ford escort-sold
Location: Largo Fl

Post

Larz how long have you had you pedals? How are they holding up?

tarheelcurt
Posts: 12
Joined: Thu Nov 05, 2015 7:13 am
Car: 2006 Infiniti m35x

Post

Thanks for the info, I saw a pair that I think I will purchase off of ebay, thanks for the link!

Larz
Moderator
Posts: 2894
Joined: Thu Feb 21, 2013 8:55 pm
Car: 2019 Q70-L RWD
Location: Ft Lauderdale, Florida
Contact:

Post

I had these same pedals (two sets) on my 2007 and also on my 2009. I used 3M super tape (20lb test) on the accelerator and drilled self-tapping screws into the brake pedal and park brake pedal after removing the rubber covers - also drilled the foot plate. I have not had a single issue. Even after the dealer did the accelerator recall, the metal was still attached.

airmanhoward
Posts: 223
Joined: Mon Dec 29, 2008 4:16 pm
Car: 12 M37-Current
08 civic lx sold
06 M35x Totaled
2000 S10 sold
Ford contour svt-sold
91 caprice-sold
90 & 93 maxima-sold
96 ford escort-sold
Location: Largo Fl

Post

Very nice thank you for the info


Return to “Infiniti M35 and M45 Forum”