Ganador wiring question.
-
lilRillo
- Posts: 396
- Joined: Mon Sep 28, 2009 4:56 pm
- Car: S14 Kouki SR20
- Location: Dirty Jers
- Contact:
Ganador wiring question.
Hey guys so i just picked up a set of ganadors for my s14 and they have 4 wires, but the usdm plug only has 3. So the colors are from left to right is black,blue,black the brown, I was told to use the first black to yellow, blue to blue, skip the 2nd black then brown to purple. Lmk if that sounds right! thanks!
-
PapaSmurf2k3
- Site Admin
- Posts: 18997
- Joined: Thu Nov 21, 2002 3:20 pm
- Car: 2017 Corvette, 2018 Focus ST, 1993 240sx truck KA Turbo.
- Location: Merrimack, NH
Re: Ganador wiring question.
What is a "Gandor"?
-
centralcoaster33
- Posts: 2634
- Joined: Tue Apr 05, 2005 10:41 am
- Car: 1997 Nissan 240SX #5
- Location: Central Coast, CA
Re: Ganador wiring question.
Did you get this figured out? I'd guess black blue is power to a verticle motor and black brown is power to the horizontal motor, so I don't see why you'd skip any wires. Maybe the two blacks go together and join with one of the three wires, then the other two colors go with the other two colors. You can get a voltmeter and turn on the car and push the mirror button and test what wire pairs have voltage and that will give you clues as to which to connect. Or look at the FSM diagram. There's like 12 combinations if you connect all wires and I don't think you should have any disconnected. When you figure it out, will you post back?