G37 wheel spacers

[DallasDrift]

I am very close to getting an '09 G37 Coupe Journey with the 19 inch wheel and tire package. What wheel spacers do I need to make it flush all around?

[RED_DET]

15 mm

[DallasDrift]

Thank you, can you recommend a good brand maybe? Would H&R be a decent one to get?

[RED_DET]

h&r, kics, they are all similar, just make sure they are hubcentric and come with longer studs. the ones with built in studs would be the best and easiest to install.

[scans]

I have an 08 G37 Journey with the stock 18" wheels. I want to add wheel spacers. I bought 2 pairs of 1" spacers. I haven't put them on yet and now I'm thinking the 1" ones might be a little wide for the front as I really don't want the tires to stick out past the wheel wells (at the top at least). Any comments would be greatly appreciated. Thanks. Marty.

[audtatious]

Factory 18" wheels are +43mm. 1" spacer = 25.4mm, thus, offset will be +17.6mm. Might clear in the front but you may have some issues in the rear.

Anyone else care to comment?

[scans]

Factory 18" wheels are +43mm. 1" spacer = 25.4mm, thus, offset will be +17.6mm. Might clear in the front but you may have some issues in the rear.

Anyone else care to comment?

Great, thanks for your reply. I tried to put them on today but the Firestone guy said they were way too big. He recommended to use half inch ones instead of one inch. Your thoughts? Again, thanks for your help. Marty.

[RED_DET]

Yes, 1" spacers are way too much on the G37. 1/2" spacers will work, that is only slightly over 12mm.

[scans]

Thanks, much appreciated!