FWD sr20

[ammo132]

okay heres my plan, i drive a 1989 nissan puslar and it has a pinner engine i must say... couple questions, i want to put a fwd sr20 in it, is there any troubles with doing so?

And my second question is, is there a proformance exhaust and preformance coilover springs available for the pulsar or do i have to get them for the sentra (same chassi)???
Modified by ammo132 at 1:27 AM 4/13/2008

[Mr1der]

try asking in the Sentra forums

[nametakennow]

It should be fairly easy.

The Pulsar has a different chassis than the Sentra, so I doubt anything designed for it will fit.

What country are you in?

[ammo132]

canada

[nametakennow]

I see... well, my understanding is that Pulsars are fairly rare in Canada, so finding parts may be tough. You may want to try the regional forums.

[Mattism78]

I have read about the swap being done before so it is possible. The trouble is going to be finding the proper info. Even the well-informed FWD SR20 sites might be lacking the info. I'd try the forums and start searching.

[nametakennow]

Check the GA16->SR20 swap thread in the Table of Contents. Basically you need all those parts, but from an SR20-powered Pulsar model rather than a Sentra.