Full-Race is now making Nissan manifolds

[DriftFasterThanGrip]

E n t e r

Their MR-2 3G prostreet manifold yielded more tourqe, a wider power band and spooled 800rpm quicker than other manifolds had on their 800whp MR-2 Turbo. Their KA manifold should be very good and do wonders for our cars.

[Nismo_Freak]

They've been making the SR manifold for a long time, and the KA manifold was always in the works as well.

[dsylvia]

their products are tight, but I aint payin $1200 for a manifold.

[scotty-2-forty]

Shoooooot ... by the post title I thought you meant "intake" manifold .

[ILikeMy240sx]

holy crap thats expensive

[Jeff240sx]

holy crap thats expensive

Maybe. But if you want THE BEST.. you need to pay THE MOST.Full race manifolds have 1/8" thick runners. The only other manifold you'll see that on is the PhatKA-T manifold. Full Race are also equal length, and Scott (Enthalpy) did a SR test.. gained 60hp and 40ft/lbs by ONLY switching manifolds from JGY Customs log manifold to a Full Race tubular.SSA, Boost Designs - They both use very thin (16ga) tubing. I'm bracing my BD manifold, ceramic coating it, and putting a flex section in the downpipe. -Jeff

[sil80drifter]

A flex section is a must for anyone in my opinion. You don't want exhaust vibrations to affect your engine/manifolds or vice versa. A lot of people dismiss them and end up breaking something. The flex sections are cheap, durable, and can be gotten in SS. I don't see a good reason NOT to use them if you are making your own exhaust.

sil80

[klattr1]

prototype pics of the Full Race manifold:

[Structure240sx]

i emailed full-race a few months ago and they said the ka manifold was already availible

[bradd]

Nice header but it is NOT equal length... I dont think there is room to make a top mount equal length.

Just count the bends and take a good look at the amount extra tube in the middle runners I see 1.5"ish more + a 30deg or so bend.

But it is still a super nice header.

[Jeff240sx]

Nice header but it is NOT equal length...

If you'd like to get technical (1" = not equal length. And you're right. But it's as equal length as a topmount gets).. it's not a header.-Jeff

[bradd]

Oh i would say there is an extra 3" in that manifold

[own3d]

no external wastegate?

[bradd]

I think they give you the option of what ever flange you want.