Fuelpump/Eccs Relay rewiring help

[shahboogz]

Ok so my rb20det harness was cut at the two green relays right next to the ecu.

I know one is Fuel pump and the other is Eccs i found the 4 wires to each but just trying to figure out which location of the wires on each relay.

Attached below is the best i could find through the FSM.

Somebody explain to me what is going on. 104 27 and 40 are understood.

I will try to get a picture of the wires that are supposed to be relayed.

This should be the last thing cockblocking the Rb from starting.

Any help appreciated.

[mattleegee]

Any help?

Run power from pump to battery or you could always jump the fuel pump relay and ground out the fuel pump wire from ecu (black/pink on rb25) that way it will constantly run haha if you really wanted it to start

[shahboogz]

Above are the 8 wires

[the_garynator]

hope this helps:emailed it to you too

[shahboogz]

Thanks alot

One question though. The thicker white wire would follow 3 on the bottom relay?

[the_garynator]

Yeah.