Fuel Injectors o-rings ripping??? Anyone no why???

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
zippe
Posts: 3
Joined: Fri Sep 30, 2005 3:01 pm
Car: Nissan 240sx

Post

Ok i have a Sr20det redtop and on cylinder # 2 the lower injector o-ring keeps ripping on me causing fuel to leek and cause a rough ideal and a miss fire.

What I have done is switch the injectors and it rips it on every one.. I have change the o-rings 3 times and always lubricate them…I pulled the fuel rail off the car and looked at #2 and #4 and the rail look the same on both cylinders.

Any Suggestions????


SCOOTER240
Posts: 100
Joined: Sat Mar 08, 2003 1:58 pm
Car: 1990 240sx sr20 black top

Post

this is a common problem when installing nissan injectors-make sure and use lots of lube-vasaline or some other type of thick lube-check your port for any obstructions or possible scoring from removing old injectors-make sure that the opening is clear of any debris-other than that you should have no problem installing-good luck

zippe
Posts: 3
Joined: Fri Sep 30, 2005 3:01 pm
Car: Nissan 240sx

Post

I got the injectors in... and so far no leek. i cleaned the fuel rail very well and used a lot of vasaline and it worked a lot better Thanks


Return to “SR20DET Forum (rear-drive)”