FS RWD CA18DET Parts

Post by **DjLiquid** » Mon May 29, 2006 9:39 am

FS RWD CA18DET Parts:

3 PistonsCrankHead (complete or any specific part you may need)Intake (complete)Any sensorCoil PacksAlternatorWater pump

e-mail me @ corylovesnikki-at-hotmail-dot-com

or drop me a message in here =)

Post by **knightrider** » Mon May 29, 2006 9:55 am

how much for the crank?

Post by **kota2240** » Mon May 29, 2006 10:35 am

coil packs? I just need one, If you do not want to part it out how much for four then?

Post by **DjLiquid** » Mon May 29, 2006 10:36 am

$20 per pack, depending on where you're located I would be safe to say about $10 for shipping. Costs are in Canadian funds

Post by **DjLiquid** » Mon May 29, 2006 10:36 am

shoot me an offer.. I'll take it out and take pics of it tonight

Post by **Kouks** » Tue May 30, 2006 5:11 am

Intake manifold stuff.....emissions...anything that hangs off the manifold.

Post by **Rookieca18det** » Tue May 30, 2006 8:05 am

how much for the head?

Post by **DjLiquid** » Tue May 30, 2006 8:43 am

How about this. You guys make me an offer on the parts.... Deal?

Post by **DjLiquid** » Tue May 30, 2006 9:20 am

The head was from the vehicle that had the blown con rod. The valves on cylinder 1 would need replacing and the head would need to be grinded down a bit to make the area smoother but other than that, the head looks brand spankin new. I even had a friend ask me if it was the original head or if it was just replaced .

I'll have pics up in a few minutes

Post by **Myetball** » Tue May 30, 2006 5:05 pm

Do you still have the intake manifold? Don't need the butterfly assembly, sensors or throttle body. I have the larger KA throttle body and I'm pretty sure all the like-new sensors I have on my fwd manifold will bolt on to the rwd manifold. Correct me if I'm wrong.

Post by **DjLiquid** » Tue Jun 06, 2006 5:38 am

Ive got the intake manifold. Kinda.. A local guy wanted it to swap over his first gen intake to the second gen but figures it isnt possible so until I get it back, I dont have it

..... Im gunna bump this thread cause no parts have yet been sold. I just want people to offer their prices and thats it =)...

Post by **tyrannix** » Tue Jun 06, 2006 6:00 am

do you still have the block? i want oil squirters, crank girdle and main bolts

CJ

Post by **DjLiquid** » Tue Jun 06, 2006 6:46 pm

I still have all that stuff available... I will rip them out tomorrow for you. Suggest a price and they are yours. Also, if you'd feel better about it, e-mail me your zip code so I can see how much shipping would cost

Post by **Not_a_sr** » Tue Jun 06, 2006 8:48 pm

do you have a oil pan in decent shape? or a ECU?

Post by **DjLiquid** » Wed Jun 07, 2006 8:40 am

Not_a_sr wrote:do you have a oil pan in decent shape? or a ECU?

Unfortunatly, all I was able to get from the car was the engine. The oil pan is shot because it blew a connecting rod through it and I managed to get an ECU a while back but I found a buyer for that right aways. Sorry

Post by **bb4_96** » Wed Jun 07, 2006 3:52 pm

I need all the ornamental covers:

cam coversfront timing cover(upper and lower parts)casfactory exhaust manifold

Post by **RiverRicer** » Sun Jun 11, 2006 1:16 pm

Engine harness w/ECU plug??? Having a ***** of a time finding one!

Post by **Myetball** » Tue Jun 13, 2006 7:50 pm

Sent you an Email.

Post by **DjLiquid** » Wed Jun 14, 2006 10:24 am

bb4_96 wrote:I need all the ornamental covers:

cam coversfront timing cover(upper and lower parts)casfactory exhaust manifold

I have the CAS and the RWD exhaust manifold. Make me an offer on em

Post by **OKRB20DET** » Wed Jun 14, 2006 11:00 am

lil off topic but..hey dj ..didn't i play with u on xbox live

my gamer tag was HS13*** where the *'s are missing letters so none of u other queers message me

Post by **turbo-sil40** » Wed Jun 14, 2006 12:49 pm

Ill give you 75 bucks for the head let me know thanks

Post by **dvd** » Wed Jun 14, 2006 3:15 pm

do you have the fuel rail? email me at dvdevo at yahoo.com

Post by **DjLiquid** » Thu Jun 15, 2006 11:14 am

You possibly could have. My name on XboxLive360 is TurboPulsar. I play DOA, Fight Night & Tom Clancy's GRAW. I havent been on in a while but when I played, I played for hours upon hours on end.

Post by **DjLiquid** » Thu Jun 15, 2006 11:15 am

Whats your e-mail. Also, fire me out your zip so I can estimate shipping charges for you as well.

Post by **DjLiquid** » Thu Jun 15, 2006 11:16 am

The fuel rail is sitting on the intake that the guy has at the moment... Ill be getting it all back from him on Sunday if he doesnt wish to purchase it from me so I'll let you know in a few days.... I appologize for the delay

Post by **turbo-sil40** » Thu Jun 15, 2006 12:24 pm

my email address is [email protected] and my zip is 29205 thanks

Post by **turbo-sil40** » Mon Jun 19, 2006 12:32 pm

do you still want to sell the head let me know thanks

Post by **dvd** » Wed Jun 21, 2006 2:10 pm

alright thanks, just shoot me a price

DjLiquid wrote:The fuel rail is sitting on the intake that the guy has at the moment... Ill be getting it all back from him on Sunday if he doesnt wish to purchase it from me so I'll let you know in a few days.... I appologize for the delay

FS RWD CA18DET Parts

FS RWD CA18DET Parts

Re: (kota2240)

Re: (knightrider)

Re: (DjLiquid)

Re: (Rookieca18det)

Re: (DjLiquid)

Re: FS RWD CA18DET Parts (DjLiquid)

Re: (DjLiquid)

Re: (Not_a_sr)

Re: FS RWD CA18DET Parts (DjLiquid)

Re: (DjLiquid)

Re: (bb4_96)

Re: FS RWD CA18DET Parts (DjLiquid)

Re: FS RWD CA18DET Parts (DjLiquid)

Re: (OKRB20DET)

Re: FS RWD CA18DET Parts (turbo-sil40)

Re: FS RWD CA18DET Parts (dvd)

Re: FS RWD CA18DET Parts (DjLiquid)

Re: FS RWD CA18DET Parts (DjLiquid)

Re: FS RWD CA18DET Parts (DjLiquid)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums