Ive got a harness thats already been wired up, im pretty sure i wired the dash plug for a 91 up s13, even though i have a 89-90 chassis, also have the ECU to with it. $250 OBO make offers !! my mega squirt is on its way and i dont need this layin around.
FS ECU and pre wired harness with KA ,MAF, Ign coil packs,and CAS
-
1SlowCA18DET
- Posts: 273
- Joined: Wed Apr 27, 2005 5:16 pm
Re: FS ECU and pre wired harness with KA ,MAF, Ign ... (Not_a_sr)
how much without the ecu and other stuff?
-
Kouks
- Posts: 763
- Joined: Mon Apr 18, 2005 12:32 pm
- Car: 1996 Nissan 240sx S14 Sr20det
- Location: Jacksonville FL
Re: FS ECU and pre wired harness with KA ,MAF, Ign ... (1SlowCA18DET)
5 speed or automatic ECU?
Mines a 92 so should be fine.
This would be plug and play as far as installing the ECU and then making all connections right?
If So I am definitely interested, I was going to do the harness myself ths weekend, this would save my arse for time....
I just want the ECU and harness, you say its wired for KA MAF? Does ths include the MAF?
Modified by Kouks at 6:10 PM 2/17/2006
Mines a 92 so should be fine.
This would be plug and play as far as installing the ECU and then making all connections right?
If So I am definitely interested, I was going to do the harness myself ths weekend, this would save my arse for time....
I just want the ECU and harness, you say its wired for KA MAF? Does ths include the MAF?
Modified by Kouks at 6:10 PM 2/17/2006
-
float_6969
- Moderator
- Posts: 17366
- Joined: Mon Aug 26, 2002 1:55 pm
- Car: CA18DET swapped 1995 Nissan 240sx (too many mods to list)
2015 SV Leaf w/QC & Bose (daily) - Location: Topeka, Kansas
- Contact:
Re: FS ECU and pre wired harness with KA ,MAF, Ign ... (Kouks)
all you have to due is install the harness and ECU everything is wired up, yeah ill throw in the KA maf too, i wont need it . its a 5speed ECU. just hit me up at [email protected], shoot me an offer.Kouks wrote:5 speed or automatic ECU?
Mines a 92 so should be fine.
This would be plug and play as far as installing the ECU and then making all connections right?
If So I am definitely interested, I was going to do the harness myself ths weekend, this would save my arse for time....
I just want the ECU and harness, you say its wired for KA MAF? Does ths include the MAF?
Modified by Kouks at 6:10 PM 2/17/2006
ryan, i think i sold my spare actuator last month, ill ask around town for one it you need one, i have an HKS but im using it on my next turbo upgrade the EVO VIII turbo thats going on this month, i would be at work right now putting togther my manifold but its 10deg and the shop heat doesnt work the greatest
Re: (float_6969)
didnt you just get that turbo a few months ago?
float_6969 wrote:[OFFTOPIC]Jon, do you have any extra T25/T28 turbo's laying around with a good actuator on them? I think mines bad and I need another. Shoot me an email if you will.