FS: Cometic 85mm MLS H/G CA18DET

[HighwayStar22]

Bought this from a guy off Club S12, who has since deployed to Iraq for 18 months, under the assumption it was a stock bore H/G. It's not. It's an 85mm H/G. I need a stock bore 1.2mm stock thickness Cometic H/G. The packaging was ripped when I recieved it. I will post some pics tonight when I get home. - $65 shipped takes it. My loss is your gain.

email limitbreak22 [at] tmail {dot} com


Modified by HighwayStar22 at 9:55 PM 8/19/2008

[Buddyworm]

I'm pretty sure even the stock HG's are 85mm. I know the rings on my stock dimension felpro were larger than the bores.

[meminto]

Nothing wrong with it, the size is correct..

[HighwayStar22]

I apologize I haven't seen a stock H/G be 2mm oversize from the stock bore. It's an 83mm bore. So running an 85mm bore H/G will be fine???

[meminto]

Absolutely, my build uses the same headgasket..

I have used two cometics now and both have been 85mm...

[HighwayStar22]

You learn something new everyday.

Am I reading your location right?

NSW = New South Wales

[meminto]

Correct...

New South Wales - Australia...