FS: ca18det spare motor FULL PART OUT! socal, will ship

[s13sr20detsilviastityper]

*SOLD* items:Upper timing coverValve coversKnock sensorAlternatorCoilpack cover

I am going to part out the spare motor I have because I am not going to spend any more money on the 240 right now and don't need it!

It is in great condition internally, a bit dirty on the outside. Everything looks to be great to me, but I have never ran the motor.

I am willing to part out EVERYTHING, assuming that I have most of the parts spoken for, I will not part out the block to sell ONE person a rod, or something of that nature. If I get buyers for the girdle, crank, rods and pistons, then I will dissassemble it and part it.

I am will to ship the head, and the block, complete. You will need to provide me with info on how to do so, I have not used freight services. (head might be able to go through UPS).

Anyways, on to the pics. The PS pump is pending at the moment.



clean cylinder walls.













cam sensor nub on exhaust cam is intact

I also have these other parts (not in any of the pics):

Upper timing belt coverLower sub manifoldIntake manifold parts (ficd, etc, all of them)Water pump pulley, fan clutch (dont know if it works properly or not)set of stock fuel injectorsstock FPRIgnition wire harness (a bunch of the plugs are cracked, but they stay on and all the wires are in good shape)

If you would like parts, list them, along with PRICES (make offer), and I will get back to you with shipping cost.

I can ship USPS for the smaller items or UPS.

I am paypal verified (40). kylekochan @ gmail.comhttps://www.paypal.com/us/veri...2ecom

Thanks for looking!

Post here or email me, kylekochan @ gmail.com

Modified by s13sr20detsilviastityper at 2:03 AM 5/5/2007

Modified by s13sr20detsilviastityper at 1:06 AM 5/19/2007
Modified by s13sr20detsilviastityper at 1:06 AM 5/19/2007

[Secret squirrel]

Ill take the crank pulley, and thermostat housing and bolts for that

SS

[s13sr20detsilviastityper]

Ill take the crank pulley, and thermostat housing and bolts for that

SS

Ok, I think the crank pulley on that one has a little chip out of the back, but I do have another one I forgot to list. I dont have a spare thermostat housing ( I assume you mean the piece that bolts onto the lower manifold).

Make an offer on the crank pulley, shipping will be $8.65 with delivery confirmation.

[driftmyke]

how much u want for complete set shipped to 95621 (sacramento)

[s13sr20detsilviastityper]

how much u want for complete set shipped to 95621 (sacramento)

Email me and we can talk, Freight shipping to your location will probably be about $150 alone.

[driftmyke]

email has been sent

[slidecrave]

interested in the AC compressor with bracket and the ps pump with bracket if not sold yet.. lmk how much shipped to 32826. thanks

[s13sr20detsilviastityper]

interested in the AC compressor with bracket and the ps pump with bracket if not sold yet.. lmk how much shipped to 32826. thanks

I do not have an ac compressor, I may have the bracket for one if you want that. PS pump is pending still.

[240sxbobbis]

yo son let me cop that powersteering pump and the bracket how much ??

[progman]

I'll take the knock sensor. e-mail me at [email protected]

[s13sr20detsilviastityper]

yo son let me cop that powersteering pump and the bracket how much ??

PS pump/bracket is pending, guy is supposed to pick it up tomorrow so I will let you guys know.

[eric9ll]

how much for the valve covers shipped to 94954

[s13sr20detsilviastityper]

Ok, some of the parts may be on hold here for a few days, My brother might be purchasing a datsun with a ca, and I may need to hold onto some of this stuff.

PS pump has not been picked up yet, was supposed to be today, I will see whats going on and update if its available.

In the meantime, keep listing what you would like and I will tell you if its available, some of the stuff will be sold regardless. (idle valves, etc).

[tyrannix]

if youre still selling and have it:i need the long skinny part that goes aongside the dipstick tube

(just blocks dust on the exhaust side of the timing belt)

there was something else, but i cant think of it right now :\

tyrannix at gmail

CJ

[s13sr20detsilviastityper]

if youre still selling and have it:i need the long skinny part that goes aongside the dipstick tube

(just blocks dust on the exhaust side of the timing belt)

there was something else, but i cant think of it right now :\

tyrannix at gmail

CJ

Sorry for the delay, I will check tomorrow.

A few items have been sold, check the first post. Thanks.

[dlong319]

can i get a price on the oil pan and the spark plug cover?

[s13sr20detsilviastityper]

can i get a price on the oil pan and the spark plug cover?

how about $10+ shipping for the spark plug cover, and make an offer on the oil pan please, I would have to remove it.

[Masterdebater]

wtf does iirc mean?

[s13sr20detsilviastityper]

wtf does iirc mean?

if i remember correctly

and i dont see it anywhere in this thread

[s13sr20detsilviastityper]

interested in the AC compressor with bracket and the ps pump with bracket if not sold yet.. lmk how much shipped to 32826. thanks

Ok...

PS pump and bracket with mounting bolts, $70 shipped. You are first in line, 240sxbobbis is next.

[s13sr20detsilviastityper]

I will consider trades for other parts, suspension pieces, etc.

[dxs080jpgex]

how much for the bottom end? block pistons i dont neec any of the other stuff like alternator just a bare loaded block. im located in randolph nj

[email protected] email me asap

[nvrplzd240]

Would you do 15 shipped for the spark plug cover to47304?

Email me at [email protected] I could paypal you tonight

[trevr]

Do you still have the injectors? If so, how much to ship to 13760

[s13sr20detsilviastityper]

how much for the bottom end? block pistons i dont neec any of the other stuff like alternator just a bare loaded block. im located in randolph nj

[email protected] email me asap

Sorry for not replying sooner, I thought I wasn't getting any action in the thread over here. Guess I was wrong

Price for block with all internals/waterpump/oil filter housing would be $200 (which includes cost for me having to crate it up) + shipping, not sure what freight charges would be

Get back to me if interested.

[s13sr20detsilviastityper]

Would you do 15 shipped for the spark plug cover to47304?

Email me at [email protected] I could paypal you tonight

Sorry, It was JUST sold, updated the first post.

[s13sr20detsilviastityper]

Do you still have the injectors? If so, how much to ship to 13760

Yessir, $50 shipped for a full set. Let me know, thanks.

[Arther3]

how much for the ecu shipped to 39759? and the ac bracket?

[s13sr20detsilviastityper]

how much for the ecu shipped to 39759? and the ac bracket?

I don't have either, look at the pictures/other parts list. That is what I have.

[s13sr20detsilviastityper]

Still have A LOT of parts left!