FS CA stuff ecu harnes IC & piping more...

[LoserbabyS13]

I have for sale an CA ECU and harness pre wired for the maf. I also have an SAFC II special edition also pre-wired in the harness. I am also selling my maf, ignitor, CAS, drop resitor and coil packs. This is whole setup for some one who has a cut harness or doesnt have an ECU and harness. I would like 575.00 for everything shipped or will part out. Prices listed below plus shipping and best offer. Everything has about 45000 miles on it verified when I bought the clip. The SAFC2 is brand new just installed professionally. I also have a full stock sidemount IC and piping that I will let go for 200 obo. [email protected]

SAFC2=250ECU=75Harness=150maf=40 SOLDcas=25drop resitor=30 SOLDignitor=30coil packs=40IC and piping=200 obo

[float_6969]

why are you ditching this stuff man?

[Nismo1182]

Maybe for a stand alone and FMIC?

[LoserbabyS13]

Maybe for a stand alone and FMIC?

You got it. Going all out. Hope boost_boy sticks around cause I am going to mirror his setup basically.

[RefriedNismo240]

give u 50 shipped for the maf.

[float_6969]

just checking. Keep us updated man!

[XtremeHKS]

got pics of the intercooler and piping?

[CA18Fastback]

damn, harnesses are gettin cheap. I just paid a lot more than that for mine a couple weeks ago, don't i feel stupid, haha

-Ian

[XtremeHKS]

damn, harnesses are gettin cheap. I just paid a lot more than that for mine a couple weeks ago, don't i feel stupid, haha

-Ian

I paid 80$

[LoserbabyS13]

got pics of the intercooler and piping?

Right now the only pics are of the piping installed. I will get some pics of the IC for you.

[XtremeHKS]

Right now the only pics are of the piping installed. I will get some pics of the IC for you.

Not trying to low ball you but i dont see this setup going for more then 100$ shipped (unless it comes with a decent BOV) then i'll give you 200$ shipped.. Is that fair in your eyes? Is it sold as is, I would like a no-leak guarantee, if i test it and it does not hold pressure will you refund the cash? (The reason im buying another I/C setup)

[LoserbabyS13]

Not trying to low ball you but i dont see this setup going for more then 100$ shipped (unless it comes with a decent BOV) then i'll give you 200$ shipped.. Is that fair in your eyes? Is it sold as is, I would like a no-leak guarantee, if i test it and it does not hold pressure will you refund the cash? (The reason im buying another I/C setup)

E-mail me we will talk. [email protected]Quote »RefriedNismo240 give u 50 shipped for the maf. [/quote]

E-mail me also.

[XtremeHKS]

E-mail me we will talk. [email protected]

E-mail me also.

I hate emails PM sent

*edit* well that sucks, looks like i'll have to e-mail you after all.

[LoserbabyS13]

you can also get me on aim loserbabys13

[XtremeHKS]

you can also get me on aim loserbabys13

even better i'll be on in 10 mins when i get to my next class.

[F3600]

what is the drop resistor ?cuz i think i miss this on my engine i could buy it from you Thx :P

i would like some picture

[LoserbabyS13]

what is the drop resistor ?cuz i think i miss this on my engine i could buy it from you Thx :P

i would like some picture

Here is a pic of the dropping resistor.

[LoserbabyS13]

I have for sale an CA ECU and harness pre wired for the maf. I also have an SAFC II special edition also pre-wired in the harness. I am also selling my maf, ignitor, CAS, drop resitor and coil packs. This is whole setup for some one who has a cut harness or doesnt have an ECU and harness. I would like 575.00 for everything shipped or will part out. Prices listed below plus shipping and best offer. Everything has about 45000 miles on it verified when I bought the clip. The SAFC2 is brand new just installed professionally. I also have a full stock sidemount IC and piping that I will let go for 200 obo. [email protected]

SAFC2=250ECU=75Harness=150maf=40 SOLDcas=25drop resitor=30 SOLDignitor=30coil packs=40IC and piping=200 obo

Whatever is not sold by Friday is going up on ebay get your dibs now! Also taking all resonable offers.

[rico05]

So the harness is stock or has it been rewired to directly plug into a USDM S13 w/ a CA? If it is a plug and play, I may be interested.

[LoserbabyS13]

So the harness is stock or has it been rewired to directly plug into a USDM S13 w/ a CA? If it is a plug and play, I may be interested.

It is plug and play I did as most people do and opted to not move the ignitor. I also have an AFC pre-wired on the harness that was installed professionally and soldered. The wire used for the MAF extension is the same sheilded cable that the harrens uses and was solderd professionaly. E-mail me if interested [email protected]

[LoserbabyS13]

Bump! I am going to start putting these up on ebay. Harness is now sold!

[normaspirated]

Will you sell just the I/C piping itself at a lower price? Or is it on ebay already?

[LoserbabyS13]

Sorry I have decided to keep the ic and piping for now. I need to get my car running asap and will installing my SDS system this coming week.

[normaspirated]

Okay. That's cool then

[anumeric]

I would like the ignitor, how much would it be shipped to zip 23322?

[DriftinNC]

Are you still interested in sellling the ic and piping or are you going to use it on your personal car?

[LoserbabyS13]

I am planning on using the ic and piping for now until I upgrade my turbo.

[NeedCAforS13]

when you upgrade your turbo, wanna sell me the stock intake pipe?:)

Sean