FS 20" Work Schwert SC1

[mexillis]

FS 20x8.5 +38 <O> disk, 2-piece welded, with Nitto NT555 245/35/20. Rims have some scratches and blemishes here and there from previous owner but nothing to noticeable unless up close. Couldn't capture it on the pics as shown below. 1700

[yosM45]

What are you going to?

[mexillis]

forgestar's already on

[audtatious]

Nice Forgestar F14's

[06M4.5]

nice new wheels

GLWS

[yosM45]

forgestar's already on

Nice, very nice....

[RM450GT]

forgestar's already on

Nice.. I like the new look
GLWS

[White-Rush]

forgestar's already on

Sir.. What are the specs on your new setup?

[mexillis]

they arent stamped but from what i can guess 20x9+40f 10.5+45r. Im running a 20mm up front though and it sits nice, I tried to run the rears with a 15mm but I couldnt slam my car because the fenders would rest on the tires since they're 275's.

[White-Rush]

Nice setup man. I'm really feeling the wheels.

[bicsintegra]

i love the new look.

[Quis]

Maxillis, did you have to run spacers on the Work to fit the BBK, and what size/brand?

[mexillis]

Yeah the fronts needed a 20mm to clear, 25 would probly be better for more clearance but aren't necessary. Rears didn't need any spacers but I used a 15 so that it didn look weird tucked in the back and flush in the front. I had eibach and echiba spacers, no problems with ether set.

[gibz4]

Hi Mexillis,
I've got that same setup with i believe are the same offsets but as seen in my previous posts, the back stick out a little. I'm running on H techs both front and rear. DO you think if i switched to eibachs in the rear that it would camber it in just like yours? I wanted my setup to look exactly like what you have!! Do you have photos of how flush the rears are? Sorry for the hijack.

[mexillis]

I can take some shots for you at ebach height np, I'm on bags and it tucks when I air out so I'm assuming based on that, the lower you go the more flush it will get. Also another thing you can try before swaping springs is get an alignment and increase the negative camber in the back. When I had eibachs I set mine to -3.5 with no issues.

[gibz4]

A pic would be great!.. did you need a kit when you set the rear camber to -3.5?

[mexillis]

New price, 1800 obo and if anyone wants the forgestars pm for details.

[DoN_BLaZe34]

Damn Mex, what do u have lined up for wheels now?!?!

[mexillis]

Idk yet but for some reason I don't think brushed wheels flow with how my kit looks now. So something either all black or a blend like the work's I have fs. I'm kind of surprised no one has bought em yet.

[06M4.5]

I always felt that the M's look good with big lips, the bigger the lip the better it looks.

[yosM45]

New price, 1800 obo and if anyone wants the forgestars pm for details.

Do both the Works and the Forgestars need spacers up front?

[mexillis]

The works need it to clear but for the forgesars Id have to check later today, I never took off the spacers up front when I mounted them.

So it looks like it could clear without spacers on the forgestar, will dismount and verify for serious buyers. I bought these used so they were made to clear the oem brakes from a M45.

[Cashcliqmajor]

im not sure how to reply on here.... been looking to reply back to u but i have a rim and tire i can sell you its the 18" one!! and sorry rear ended bad so no go for trunk clips... email me at [email protected]

[mexillis]

Bump 1700

[Wallstreet]

Is that price shipped, and are all 4 wheels/tires the same size and specs? Also how much tread left on tires?

[mexillis]

That is before shipping and yes all 4 have the specs I posted above. It looks like I might 6 or 7/32 remaining.

[rxmclaren7]

mexillis....you sir have one sweet ride!! if i did not already have 20" wheels i would be interested....but i also have the dreaded awd m

[mexillis]

thanks, these would work on a awd M, they arent staggered.