Front runner Skinnies - S13 w/ z brakes.

Post by **Mastaflash** » Tue Jul 15, 2008 1:57 pm

im wondering what anyone is doing for sknnies on the front of their 240sx chasis. i have an s13 with Z32 brakes, and im interested in getting a set. if you run them please post up some info about what you run.

Post by **kentuckyslider** » Sun Jul 20, 2008 6:06 pm

i've been wondering the same thing. I would have to think that you would have to run 17"s. There is no other option and I know you can't run 15x4" wheels.

Post by **rb25drag** » Thu Jul 24, 2008 1:04 pm

Im not sure how big the z32 caliper is, I think they run a Factory 16" wheel, But I know they guys with trans ams Which comes factory 16" Wheels and the Skinnies will not fit they are Grinding some on there calipers until they clear.

I have Stock S13 calipers, I Used a Small spacer 5mm and have no fitting issues.

Post by **Mastaflash** » Fri Jul 25, 2008 12:05 pm

i test fitted a set of weld shinnies, and i put a 20 and a 15mm spacer on top of each other, and it looked like it needed another 15mm or better.

Post by **efeezie** » Wed Aug 06, 2008 4:20 pm

Yeah it wont work unless you get weld alumastars. I tried to fit them behind my prostars and it needed about 1.25" spacer to clear.

I just run the q45 front brakes. I still needed a 1/4" spacer

Front runner Skinnies - S13 w/ z brakes.

Front runner Skinnies - S13 w/ z brakes.

Re: Front runner Skinnies - S13 w/ z brakes. (Mastaflash)

Re: Front runner Skinnies - S13 w/ z brakes. (kentuckyslider)

Re: (Mastaflash)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums