Front Bearings/Wheel hub 2004 Pathfinder SE 4x4

[Nissanpathy04SE]

Trying to replace outer and inner bearings on a 2004 nissan pathfinder SE. Removed the snap ring and all the way back to the Wheel bearing locking nut, removing the bolts on the Wheel hub. I can see the outer bearings but can not get the wheel hub off. Is there something I am missing ? is the assembly pressed onto the knuckle assembly or do I need to remove the knuckle assembly also ? Can someone please help!

[dlucke17]

I can't help to much, but only can tell you that the hub's that I have removed from my 93 240sx, 95 j30, and 2000-02 Q45 slid right off the spindle after I removed the cotter pin and nut. I didn't have to remove any snap ring or any other hardware (I believe, has been alittle while). Once the hub was off I did have to remove the ABS, snap ring and seals, but don't think there is anything else holding this on to the spindle... Good luck and keep searching. Let us know what you find.