front Ball Joint -S13

ONLY for ADVANCED technical discussion about the 240sx!
slik85
Posts: 3
Joined: Tue Aug 11, 2009 4:10 am
Car: nissan 200sx s14 zenki

Post

i can not find this parts numberpleas help mymy ball joint is KO


User avatar
MisteenoMike
Posts: 87
Joined: Mon May 11, 2009 10:35 pm
Contact:

Post

I don't think you can get OE Nissan ball joints by themselves.

Aftermarket to the rescue!

http://www.pdm-racing.com/products/suspension.html

Scroll down to "Moog Front Suspension Lower Arm Ball Joints"

Enjoy!

User avatar
cxlumpy
Posts: 116
Joined: Sun Feb 10, 2008 6:38 am
Car: 1989 USDM 240sx coupe
Contact:

Post

i would just say go to napa. but youre in Slovakia. parts store should have some? if not just order online.

slik85
Posts: 3
Joined: Tue Aug 11, 2009 4:10 am
Car: nissan 200sx s14 zenki

Post

PLEAS HELP
Modified by slik85 at 11:55 AM 8/11/2009

slik85
Posts: 3
Joined: Tue Aug 11, 2009 4:10 am
Car: nissan 200sx s14 zenki

Post

thanks I cannt this FBJ from MOOG in Slovakia buyi need alternative parts number from any producer(landforder,niparts,JParts......)

pleas help

User avatar
turbocarslut
Posts: 243
Joined: Mon Oct 14, 2002 2:46 pm
Car: 1989 Nissan 240sx (hatch)
2011 BMW 535xi

Post

Take a look at this:

Roll Center Adjuster - Megan Racing Ball Joints

Megan Racing roll-center adapters are designed to correct suspension geometry after a car has been lowered. The uneven length of suspension arms causes toe adjustments to occur drastically during braking. Megan Racing roll-center adjusters make up for the travel in the suspenion arms to return suspension geometry to its correct starting point. This allows alignment and steering to remain more consistent and predictable during aggressive driving and competition.

http://www.gpiperformance.com/..._4051



Return to “240SX Technical Forum”