Frame Rail fix

[bllabong89]

So I have a question for all of you 240 guys who have messed up frame rails. I am going to be making some frame rail pieces to cover up/reinforce the stock frame rail on my s14. It appears as if alot of people have put the jack on my frame rails so I am going to fix them. Since I have access to a welding shop, I was going to have them bend up some metal for me to mimic the front section of the fram rail at the bend. Would anyone be interested in these as I may make a few sets to sell?

Mods, sorry if this is the wrong section. I wasn't sure where to put it because I am not selling anything at this time. Please move if needed.

Thanks,
Andrew

[Sabot]

When you get them done please post pics.

[bllabong89]

for sure. I will put pics up of them by them selves and before and afters of the frame rails. just wondering if this may be of interest to anyone.

[OutToWinPAHC]

When you do, please post in the fabricators market place not in 240 gen

[kietdude]

This might save you the trouble depending on how much the shop wants to charge you. Here is the link.

http://www.xcessivemanufacturing.com/me ... 175&step=4

[bllabong89]

that is actually a perfect example of what i am talking about. I know the guy who owns the shop so it will all be really cheap or he will teach me how to use the break(or whatever its called) so I was thinking that if i follow through with it, I would charge roughly 50-75 per side but that is all on the drawing board still. Thanks for the link