Found another KA...a few ???

[240sxOwner]

I just found another KA24de for my 240 and i have a few questions. I got the engine from someone who did the sr swap and i got it for 200 bucks....perfect except for it was with an auto transmission...What do i have to take off of my engine to make the other one work. Do i just swap the flywheel for the torque converter...Thanks for the help

[erich]

There is a small bushing in the crank that needs to be removed. Inside the hole where the input shaft of the transmission goes.

[Drift Machine]

There is a small bushing in the crank that needs to be removed. Inside the hole where the input shaft of the transmission goes.

Yeah and it's an MF'r to get out.

[240sxOwner]

ok...thanks...i am going to pick it up now so i will look for it

[BoyWonder]

Just as a heads up, you can rent a tool called a "Blind Hole Puller" (from a place like Autozone, like I did) which can really easily remove that bushing. It's 149$, but if you rent it you can bring it back and get a full refund. I highly suggest it.

[240sxOwner]

i will check into that...thanks

[240sxOwner]

New batch of questions..lol Since the motor is just chillin in my garage what should i do to it to get an edge? Keep in mind this motor will be on laughing gas. I was thinking porting and polishing the intake manifold, removing butterflies, and maybe porting the head. I do not want to spend a penny though, except for supplies. What do you guys think? Help me out a little

[240sxOwner]

no one???

[[Zero-S]]

Well since nobodys posted, I believe a good p&p would be in order, and possibly some sort of fuel management, and a nice big turbo. Kthx.

(ps forget the RB25;))

[marshun]

rebuild the block 0_0

[240sxOwner]

ok i just finished portin and polishing the intake plenum...looks really good and is very smooth....ill see if i can get some pics up later

[[Zero-S]]

You know Mark I'm a bit weary about you hand porting your intake mani...remember all the bad stuff thats happened when you've done otherwise harmless things to your engine;)

But yeah post pics. Quickly.

[240sxOwner]

pics are up.... http://www.nissaninfiniticlub....=4857