found a ka24de

[90N240]

its at a salvage yard for $450 low miles runs i guess..

its outta of a 93 240sx

i have a ka24e in 90 240sx

and i found a 92 240sx coupe and it has all wires still in it (harness) but it is power window door etc..

could i use this harness and ecu in my 90 from the 92 coupe for the swap???

and what else should i take from this 93 coupe to complete the swap???

i heard that my ka24e transmission will work with the ka24de??

[dabum]

search about the swap,

i dont think the ecu will work on the 92 because of the different distributor cause different tach output nd signal to your coil plus all your senders would be screwed, inless u can put a sohc distributor in there nd then you'd have to swap the sohc harness and ecu and it would probably work fine.. actually tha sohc is 12v compared to tha 16v so im not sure, almost theres an extra cam and about abunch of other different things... u can give it a try, i think your better off just usin everythin the 92 came wit or get it.

yes the transmission will swap into the dohc,

heres a link that may be usefullhttp://www.zilvia.net/faqs/archive/SOHCtoDOHC.asp

[Altiman94]

harness and ecu from the 93 will work. The transmission will also bolt up.