First I cut out some scrap metal.
Then I drew out the design for the mount on the metal so i could cut it out.
The cutout mount.
It took a little trimming and bending to get around the clutch MC and the little green box.
Test fit before the mount.
This is the ball mount that i used. I got it from radio shack.
The pattern for the ball mount.
The finished mount.
This is the mount with the whip in it before bending it.
The setup finished with the bent whip.
This is the antenna folded down into the bay.
This is the completed antenna set up. It turned out really sturdy and barely moves in the wind. And the best part is i can fold it down when im not using it.
