flywheel

Post by **scruffy63** » Mon Mar 08, 2004 12:53 pm

Hey guys I need a flywheel fast. i'm located in newnan, ga.I just a stock replacement one.i'm guessing the year doesn't matter. but I have a 89.can anybody spare or sell me one. any help is appreciated.

Post by **SHIFTrl240** » Mon Mar 08, 2004 12:53 pm

just buy one at advance auto, a used one will do murder on your clutch if you don't get it resurfaced anyway. i picked mine up for 80... with 30 dollar core fee

Post by **scruffy63** » Mon Mar 08, 2004 12:53 pm

well I was in the process of changing my clutch and my mechanic told me my flywheel was broken. so I just need a cheap one to replace it with. they always resurface the flywheels. do you have one?

Post by **scruffy63** » Mon Mar 08, 2004 12:53 pm

well if nobody has one can you guys help me find one?thx

Post by **eddiec** » Mon Mar 08, 2004 12:53 pm

a have one. make an offer.

Post by **scruffy63** » Mon Mar 08, 2004 12:53 pm

20 + shipping

hey we have the same clutch. how does it feel?

Post by **eddiec** » Mon Mar 08, 2004 12:53 pm

i like it so far. i can feel a little bit more pressure in the pedal feel.

i'll take your offer. its kinda heavy but i'll get fedex to weigh it tomorrow and give you a quote on the shipping. whats your zip code??

Post by **scruffy63** » Mon Mar 08, 2004 12:53 pm

its 30265. I can't wait to feel my new clutch but even after I get it i gotta break it in for 500 miles i believe

hey i've been lookin for one so much i didn't remember to ask you what kind of condition its in.its ok if it needs to be resurfaced.

Post by **eddiec** » Mon Mar 08, 2004 12:53 pm

check here about in the middle of page. 2 pics one front one back.

Post by **scruffy63** » Mon Mar 08, 2004 12:53 pm

are there any hairline cracks in it? if there aren't then email me about money [email protected], or talk to me on aol scruffy163

Post by **Dattebayo** » Mon Mar 08, 2004 12:53 pm

flywheel weight is 22-24 lbs, just to help out.

Post by **scruffy63** » Mon Mar 08, 2004 12:53 pm

thanx 2bn. would any of you guys happen to know how much it would cost to lighten it to about 15-18

Post by **Dattebayo** » Mon Mar 08, 2004 12:53 pm

prolly about 150-200 at a machine shop. But you'd have to get the cut pattern right, or you would make the flywheel unstable.

Its probably not worth it. You can have a fidanza flywheel that weighs 12 lbs for about $375 anyway.

Post by **scruffy63** » Mon Mar 08, 2004 12:53 pm

what could cause a flywheel to break? is it high revving or dropping the clutch in too fast?

Post by **Dattebayo** » Mon Mar 08, 2004 12:53 pm

age/heat yada yada

flywheel

flywheel

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums