flywheel?

[bersh240]

anyone have a oem flywheel they could sell me?

thats my last hope in fixing my starting problem.replaced batt. starter. bolts. checked all the wiring.only thing left is the flywheel. has to be the missing teeth.
Modified by bersh240 at 12:05 AM 12/19/2009

[themadscientist]

"has to be"

That sounds like you don't know. Do you?

[sjbsuperman1425]

did you check your ignition?

[bersh240]

ignitions fine. its somethin mechanical. checked all wiring and everything. took a volt meter to it. its good.

its deff the flywheel cuz i had the starter rebuilt. got new battery..and it only happens at random. theres teeth on the flywheel missing for sure. cant really fix that can you..?soo.. new one is neededanyone got one? of a place that still has them? not the super duper jun one. im not that rich. just need oem.

[zmannz]

I would soooo definitely take all the plugs and the starter out and rotate that and see whats really up.

[bersh240]

like i said.. the flywheel is missing teeth for sure.why would u tell me to take it all apart again and look at broken teeth. again.

anyone no where i would get an oem one?i emaild a bunch of nissan parts places and i either got "we dont carry that anymore" or "no. its not for any us car. so we dont have it." or just no answer at all..comon guys. i need one badly.

[btm88]

If a Ca18de flywheel can be used on a Ca18deT then check Rockauto.com. They have stuff for the Ca18de.

[zmannz]

I see a lot of folks changing out to certain sr20 units with pieced together clutch kits, but I guess you would know about that too. Just trying to help.

[bersh240]

ya.. i dont wana do sr since i just got new starter and clutch and pressure plate are brand new.and i was searchin around. i dont no if de works with det cause pulsars are fwd. am i right? hope im not. cause there only 60 dolla

[sjbsuperman1425]

unless someone on here has a used one to sell you, you are stuck with having to buy an aftermarket one, or just deal with the random hit or miss with starting.

[bersh240]

so there isnt any new ones?ok. well. if anyone has one let me no.

and any recomended aftermarket ones?

[zombieslider]

i have one, whats your zipcode im assuming shipping might be kinda expensive to pa from georgia but im willing to let it go for like pretty cheap plus shipping

[bersh240]

17602

oem ca18det? good shape?if it needs resurfaced thats fine. but teeth?thanks alot

email me if you [email protected]
Modified by bersh240 at 12:44 AM 12/20/2009

[zombieslider]

ya its oem, and should be resurfaced but the teeth look fine. Ill email you on monday when i can check the costs to ship it.

[bersh240]

alright thanks. looking forward to the email later today.

[zombieslider]

email sent

[zombieslider]

i got your check today, ill be shipping the flywheel out tomorrow