flywheel problem

[1grns14]

This is my problem, my manual trans wasnt working after 2 weeks of driving it and i took appart the trans. and this is the funny thing, I pulled of the trans and the clutch and flywheel fell off. All 6 bolts on the flywheel snapped off. So with the part where bolts where flywheel bolt up to, the part that is connected to the engine/crankshaft. Do i have to just replace that piece or do i have to replace the entire crankshaft. I need an answer ASAP. Thanks

[navysnail]

umm, cant you just order some more bolts from nissan and drill the old ones out?

[Magnes]

If there is any damage to the inner bore of the flywheel or the lip of the crankshaft (enough that the flywheel doesn't fit snug) then you are in trouble. Otherwise...

1* Make sure you use quality bolts, source them from Nissan.2* Make sure any dowels are in place3* Torque the bolts with a torque wrench don't trust your muscles to tell you. Loctite won't hurt.