Flywheel diameter

[s13drft89]

Hello, Iam trying to find the diameter of the 300zx flywheel and the sr20 flywheel. I have a 300zx rps light wheel flywheel, and it bolts up onto the sr20, iam going to be doing a sr swap into my 300zx, and i have a rps flywheel laying around. I bolted it up to the sr and it bolts with the problem, only concern is the starter and if the clutch will bolt up. I tried to call RPS any noone answered. Iam clueless as to were to search for this info. Thanks-Ricky

[mtcookson]

Z32 flywheel right? N.A. has a 240 mm setup while the TT has a 250 mm. I'd say the SR20 uses a 240 mm setup but I'm not positive. I'm searching around though. The more importantly thing to check is the offset so to speak, where the ring gears are located on each flywheel basically.

[Fastkingcab]

NA Z32 is 240 TT is 250MM and sr20 is 240MM

[clutchnet]

SR 20 DET is 11.8 inches outside diameter and 300ZX TT is 11.9.Now, the starter gears are totaly different, don't know if it's going to work.If it was 300ZX non turbo, it would fit in to bellhousing, no problem.Is that the case?Igor K.