flywheel/clutch for rb26dett with a rb25 trans????

[stillubercuban]

im contemplating doing this conversion in a 240...just trying to get everything down on paper first...so what fly wheel should i use n what clutch.....lookin to push 450 to 500 hp...thanks!

[kjlindgr]

I say call up RPS and get a carbon/carbon clutch made. Either that or call up Quarter Master and get a quad disk carbon button clutch made and mated to an RB auto flexplate. That would rox0rz the heezee.

[Booztd 3]

im contemplating doing this conversion in a 240...just trying to get everything down on paper first...so what fly wheel should i use n what clutch.....lookin to push 450 to 500 hp...thanks!

Any NA 300ZX clutch will work. RPS will also make an NA sized clutch setup with the strength of a TT setup

[skylinegrl13]

exedy makes a twin plate, if you've got the $$.

[HxC_Nismo]

use the rb25det flywheel and starter and you can use the 300zx clutch but spec makes one for the rb25det for the stage 3+ part # sn233f its good for 550 ft lbs torque so its can take over 550 hp no problem and its sprung so you can drive it on the street with no problem. http://www.ultrarev.com has the lowest price for that clutch that ive seen so far.

[lovenis]

try an Exedy clutch, in this case you should probably go with their 100% over stock double diaphragm pressure plate and 6 or 4 puck disc.

[s14_girl]

I have a Clutchmasters Stage 4 for an NA 300zx. I haven't driven on it too much yet, but I like it so far.

[s14_sport]

i say go with an ogura single plate clutch and flywheel kit from rhdjapan.com or if u got the cash twin plate.....best investment ever made!!!

oh and i know this question has either been asked or at least thought about before...is s14_girl really a chick? or is it just some transmission dude with a really sick fantasy of becoming a chick?


Modified by s14_sport at 6:43 PM 8/24/2007