FL Treasure Coast Chat
-
drftsil8ty
- Posts: 1719
- Joined: Mon Jun 14, 2004 5:41 am
- Car: Cobalt SS turbo
-
nismotuner82
- Posts: 245
- Joined: Wed Jul 28, 2004 12:22 pm
cus i dont want to deal with it anymore plus i dont have the money or the time to fix the car i have all the parts to fix the head and the extra head but i just dont have the time a nymore i have 2 jobs and they only make me enough to pay all the bills so i know its gona take me a while till i setlle so im just not all about the car anymore at least thats the way i feel at this moment plus CORY u know about the car 2 how im driving it so well i dont know im trying to find a ok car to drive around im really looking for a 2 door honda integra somewhere around the 90s if anyone has one around and i could trade it but i m not sure yet will try to decide soon
-
nismotuner82
- Posts: 245
- Joined: Wed Jul 28, 2004 12:22 pm
-
MaDD_Drizzle
- Posts: 315
- Joined: Wed Sep 14, 2005 5:31 pm
- Car: 93' Nissan 240SX SE Coupe
- Contact:
Re: (onevia13)
dude whats wrong with ur car man?....dont tell me ur 240 crapped out on ya man....
-
Florida240sx
- Posts: 11114
- Joined: Thu Jul 01, 2004 7:17 am
- Car: 1993 Nissan 240SX Hatch 5spd
2012 Nissan Altima S coupe 2.5 - Location: DeLand FL
-
drftsil8ty
- Posts: 1719
- Joined: Mon Jun 14, 2004 5:41 am
- Car: Cobalt SS turbo
Re: (Florida240sx)
Florida240sx wrote:By going to a different car it fixed temporary until it breaks as well, then your in the same boat. Look at what you have already fixed, what else is there left to wear out??
very true
-
S13FASTBACKSR
- Posts: 2177
- Joined: Sun Nov 27, 2005 10:28 am
- Car: '92 Fastback SR powered
Re: (drftsil8ty)
whats up guys, my names alex I know a lot of you probably dont know me but I live in psl and I have a white s13 hatchback with an sr. I just upgraded my turbo, injectors, and maf to a z32...but my car is running like crap. I believe my maf may be bad or I may have a bad tune. so i was wondering if any of you could help me out by letting me test out your z32 maf on my engine if you are running one or if anyone happens to have 550cc injectors and a z32 maf setup if I may put my ECU into your car to figure out whether or not if I have a bad tune. I would greatly appreciate anyones help. Ive been looking forward to coming to the thursday night meets and hanging out with you all so once again any help to get my car back on the road would be greatly appreciated.
Re: (S13FASTBACKSR)
Sorry man my cars is running way to good to be ripping out stuff.Plus the money factor that I have dumped into it.Wish I could help, But I dont know much about tuning my motor since XAT did it all. Anyone else?
-
drftsil8ty
- Posts: 1719
- Joined: Mon Jun 14, 2004 5:41 am
- Car: Cobalt SS turbo
Re: (S13FASTBACKSR)
sorry....no sr for me
-
S13FASTBACKSR
- Posts: 2177
- Joined: Sun Nov 27, 2005 10:28 am
- Car: '92 Fastback SR powered
Re: (drftsil8ty)
Alright guys thanks for letting me know I appreciate it. Anyone else that could help me out?
-
NIGHTfall_240sx
- Posts: 3521
- Joined: Sun Apr 06, 2003 9:33 am
- Car: Nissan S14 [notchtop SR] SOLD
damn man, i need to come to the local forums more!
how you been guys!!!! any of ya going yo HIN today in orlando? ill be there, sportin my NICO shirt if i find it, so say whatsup to your boy!
my car gets to get painted soon
gunmetal grey, she is gunna be lookin alot better
and the new clutch and flywheel GRAB!!! i love it.
so where are the local meets now? everytime i go lookin for them, they move.
anyways,,,see ya on the street friends,
how you been guys!!!! any of ya going yo HIN today in orlando? ill be there, sportin my NICO shirt if i find it, so say whatsup to your boy!
my car gets to get painted soon
gunmetal grey, she is gunna be lookin alot better
and the new clutch and flywheel GRAB!!! i love it.
so where are the local meets now? everytime i go lookin for them, they move.
anyways,,,see ya on the street friends,
-
MeanGreenS13
- Posts: 3390
- Joined: Sat Aug 20, 2005 12:59 pm
- Car: 2011 Chevrolet Silverado 2500HD
- Location: Ocala, FL
- Contact:
Re: (NIGHTfall_240sx)
sunday nights 7pm in vero at riverside theatre parking lot over the barber bridge... usually a bunch of friends out there but im going to invite any local nissan person we have here, to attend because for some reason, not many people show up these days... and if you come, NO SPEEDING lots of cops around there and they love us so lets keep it that way
-
drftsil8ty
- Posts: 1719
- Joined: Mon Jun 14, 2004 5:41 am
- Car: Cobalt SS turbo
Re: (NIGHTfall_240sx)
bout time you visit the regional fourms.......
lol...hit me up for the night drive!!!!...
-Pete
lol...hit me up for the night drive!!!!...
-Pete
Re: (NIGHTfall_240sx)
PSL meet is at the old Winn Dixie parking lot behind Wendys. Where the hell have you been Jeff? Hows the upgrades going?
-
NIGHTfall_240sx
- Posts: 3521
- Joined: Sun Apr 06, 2003 9:33 am
- Car: Nissan S14 [notchtop SR] SOLD
-
drftsil8ty
- Posts: 1719
- Joined: Mon Jun 14, 2004 5:41 am
- Car: Cobalt SS turbo
Re: (NIGHTfall_240sx)
you owe money to me too....j/kNIGHTfall_240sx wrote:lol, got paused for awhile... i owe some money to the man....
...mother fu<k the man
so when is gumby gonna get painted?
-
MaDD_Drizzle
- Posts: 315
- Joined: Wed Sep 14, 2005 5:31 pm
- Car: 93' Nissan 240SX SE Coupe
- Contact:
Re: (NIGHTfall_240sx)
goodness...look who decided to show his face lol...good ol jeff. the man that introduced me to nico good to see u still around bro, hope to see ya soon.
-
drftsil8ty
- Posts: 1719
- Joined: Mon Jun 14, 2004 5:41 am
- Car: Cobalt SS turbo
Re: (YadinP)
You better bring wifey....lolVanesa says she will feel neglection
-
MeanGreenS13
- Posts: 3390
- Joined: Sat Aug 20, 2005 12:59 pm
- Car: 2011 Chevrolet Silverado 2500HD
- Location: Ocala, FL
- Contact:
Re: (JDogg95)
everyone come to Moroso tomorrow night and watch me run at 15psi on the T28! WOOT!
-
drftsil8ty
- Posts: 1719
- Joined: Mon Jun 14, 2004 5:41 am
- Car: Cobalt SS turbo
-
MeanGreenS13
- Posts: 3390
- Joined: Sat Aug 20, 2005 12:59 pm
- Car: 2011 Chevrolet Silverado 2500HD
- Location: Ocala, FL
- Contact:
Re: (drftsil8ty)
well i went to the track last night guys... the track sucked... i tried both lanes.. both runs i got in, i spun WELL past the 330 mark... the 2nd run i spun all the way to the 1/8th.. and yes i was on my Dunlop FM901 SP Sport Street Tires... i have no DRs right now..
heres the times
Run 1 - VS 04 STI - 13.565 @108.31 with 2.4 60 foot spinning through the 330...Run 2 - VS 03 SRT4 - 13.657 @108.51 with 2.4 60 foot spinning though 1/8th...
the trap speeds indicate a 12 second car if i could hook up. I was running 15psi on the big T28 i have. It was absolutely insane feeling once it finally hooked up, the first run i was kinda feeling out the track because there was a wreck before me and i was one of the first back out there. I also hadnt yet taken air out of the tires and was still at 35psi pressure in the rear... second run i dropped it to 25 but it didnt really help much the track just flat out sucked last night.
heres the times
Run 1 - VS 04 STI - 13.565 @108.31 with 2.4 60 foot spinning through the 330...Run 2 - VS 03 SRT4 - 13.657 @108.51 with 2.4 60 foot spinning though 1/8th...
the trap speeds indicate a 12 second car if i could hook up. I was running 15psi on the big T28 i have. It was absolutely insane feeling once it finally hooked up, the first run i was kinda feeling out the track because there was a wreck before me and i was one of the first back out there. I also hadnt yet taken air out of the tires and was still at 35psi pressure in the rear... second run i dropped it to 25 but it didnt really help much the track just flat out sucked last night.
-
MaDD_Drizzle
- Posts: 315
- Joined: Wed Sep 14, 2005 5:31 pm
- Car: 93' Nissan 240SX SE Coupe
- Contact:
Re: (MeanGreenS13)
my G-tech says i am running high 15's lol....i barely touched the mechanical side of my car.
Like i was telling yadin, right now im just doin some regular mechanical maintanance to get the sucker running smooth all around. and doin some hardcore cleaning ...
The interior had a complete make-over and still touching up on few more things in there. and the engine is getting a New timing chain kit installed to get rid of that annoying rattle-can thats stuck in there new OBX-R Platinum tip spark plugs and OBX-R 10.3mm spark plug wires...strut bars (front and rear) to give it some more stability because the last time i went up to orlando to go to the Hot import nights my brother was doin donuts in my car and few days after the windshield got a small crack line down the left corner of the windshield from the stress. Polishing the valve cover and to give it a nice polished alluminum shine....
just little stuff for now..dont wanna open up my wallet too much right now since im back in school either way im waiting for my engine to die out to do the sr20 swap and so on, so i dont wanna invest in it too much. even though these are things that i can swap em over to the sr20 without a problem.. the engine has 115,000 miles right now and i dont think it wants to give up just yet...buty we'll see.
Like i was telling yadin, right now im just doin some regular mechanical maintanance to get the sucker running smooth all around. and doin some hardcore cleaning ...
The interior had a complete make-over and still touching up on few more things in there. and the engine is getting a New timing chain kit installed to get rid of that annoying rattle-can thats stuck in there new OBX-R Platinum tip spark plugs and OBX-R 10.3mm spark plug wires...strut bars (front and rear) to give it some more stability because the last time i went up to orlando to go to the Hot import nights my brother was doin donuts in my car and few days after the windshield got a small crack line down the left corner of the windshield from the stress. Polishing the valve cover and to give it a nice polished alluminum shine....
just little stuff for now..dont wanna open up my wallet too much right now since im back in school either way im waiting for my engine to die out to do the sr20 swap and so on, so i dont wanna invest in it too much. even though these are things that i can swap em over to the sr20 without a problem.. the engine has 115,000 miles right now and i dont think it wants to give up just yet...buty we'll see.
-
NIGHTfall_240sx
- Posts: 3521
- Joined: Sun Apr 06, 2003 9:33 am
- Car: Nissan S14 [notchtop SR] SOLD
-
NIGHTfall_240sx
- Posts: 3521
- Joined: Sun Apr 06, 2003 9:33 am
- Car: Nissan S14 [notchtop SR] SOLD
Re: (MaDD_Drizzle)
are you polishing it yourself?MaDD_Drizzle wrote:Polishing the valve cover and to give it a nice polished alluminum shine....
my friend chad oevr in tampa was suppose to do mine for me but failed to, and ive been dying to get mine done, but im just too lazy, so once you do yours and figure out how long it takes, if ya wanna make a few bucks, just tell me a price and ill give ya my cover
-
drftsil8ty
- Posts: 1719
- Joined: Mon Jun 14, 2004 5:41 am
- Car: Cobalt SS turbo
Re: (NIGHTfall_240sx)
what up my N*****'s,....lol
anywho, are we meeting next thursday?
and jeff, your car will never get painted!!!!!
bwahahahahahahaha
anywho, are we meeting next thursday?
and jeff, your car will never get painted!!!!!
bwahahahahahahaha
-
MaDD_Drizzle
- Posts: 315
- Joined: Wed Sep 14, 2005 5:31 pm
- Car: 93' Nissan 240SX SE Coupe
- Contact:
Re: (NIGHTfall_240sx)
Hey jeff...havent seen u at all... not even on the road lol. As for the polishing and what-not i dont know when im gonna get around to do it since I am helping my brother fix his 300zx and THEN i was gonna install the new timing kit on mine so as my valve cover was out i was gonna sand it all down and get all that nasty gunk off and polish it real nice...im not sure when thats gonna be so its hard for me to tell u when i would be able to do yours...
PS- what exactly are u trying to do to ur valve cover?...is it staying red or u want me to take off the powdercoat and polish it so u can powdercoat it another color?
PS- what exactly are u trying to do to ur valve cover?...is it staying red or u want me to take off the powdercoat and polish it so u can powdercoat it another color?