fiznat part II: step one

Post by **fiznat** » Fri Oct 14, 2005 5:24 pm

Ahhh so here we go again. I decided I'm going to be building this car back up, bigger and better than it was before. Before all that mess happened that made me sell parts, I made a deal to buy this turbo- and it finally arrived today.

Precision GT3071R .63 A/R, 56 trim

I have a question though. I bought this used (never used, but from a forum person) for a deal, and Im still not entirely sure what I've got here. In the 2nd pic you can see an extra threaded hole on the shaft. There is another one on the opposite side. These are NOT oil holes, the turbo has oil ports in addition to these. Are these for water cooling? I didnt know this turbo was water cooled till I saw these ports...

Anyways, this is the first step in my rebuild- which is going to be pretty badass. Looking for 500 rwhp out of a fully built motor with the AEM EMS and methanol (again). Its going to take a loooong time to get the money together for the project, but its in the works!

Post by **DrJuice164** » Fri Oct 14, 2005 5:27 pm

thats ganna do some damage

Post by **Structure240sx** » Fri Oct 14, 2005 5:30 pm

yes have to be for water cooling. the R means ball bearing. ball bearing turbos are watercooled

can you see any part number enscripted anywhere, possibly on he turbine inlet flange? i have 3 different 3071r's listed in my slightly old precision list

Post by **fiznat** » Fri Oct 14, 2005 5:32 pm

haha I knew it was BB, didnt know all BB turbos were water cooled. Cool! Guess Ill be figuring that out later..

Post by **fiznat** » Fri Oct 14, 2005 5:35 pm

Structure240sx wrote:can you see any part number enscripted anywhere, possibly on he turbine inlet flange? i have 3 different 3071r's listed in my slightly old precision list

THF3-15

IM me if you find it!

Post by **Nismo_Freak** » Fri Oct 14, 2005 5:35 pm

DrJuice164 wrote:thats ganna do some damage

I don't think thats a good thing to say given what his last engine did lol.

Post by **Structure240sx** » Fri Oct 14, 2005 5:38 pm

well if its the B compressor cover its rated to 430hp, the E cover is rated to 440hp. either one was retailed @ $1295 new. im waiting for my new price list to get here, prices went up slightly

Post by **fiznat** » Fri Oct 14, 2005 5:42 pm

We'll see about those power ratings Right about in my range anyways, but I dont think itll be a problem stretching it a little..

Post by **Structure240sx** » Fri Oct 14, 2005 5:45 pm

definitly not, wait til rick gets his *** home from driftshow-off and back on the dyno

Post by **MS180SX** » Fri Oct 14, 2005 5:46 pm

sweet turbo forest.. glad to hear your gonna do it all over again... i wana build one too, so maybe we can get a discount of we buy two of everything?

Post by **fiznat** » Fri Oct 14, 2005 5:49 pm

MS180SX wrote:sweet turbo forest.. =

Its Foster, lol, but thanks haha!

Post by **MS180SX** » Fri Oct 14, 2005 5:52 pm

its late and im drinkin my pains away...

click on turbo zy or wait for the one im gonna post to see why...

Post by **NISTECH** » Fri Oct 14, 2005 5:56 pm

Run forest RUUUNNNN

Post by **fiznat** » Fri Oct 14, 2005 6:19 pm

Woaaahhh out of nowhere, Scott swoops down to get the easy cherry pickin' joke!!!

You better watch your back, ol' buddy. Quit turnin my turbo thread into some craptacular crapfest!

Post by **MS180SX** » Fri Oct 14, 2005 6:25 pm

NISTECH wrote:Run forest RUUUNNNN

Post by **Florida240sx** » Fri Oct 14, 2005 6:40 pm

Don't know if this is quite ownage yet.....Was a good attempt though.

Post by **NISTECH** » Fri Oct 14, 2005 6:56 pm

Sorry fiz, I couldnt resist..lol searchin active topics and caught your thread.

Was meanin to comment on your turbo and slipped out with only a joke.

That turbo looks alot like the one my neighbor was supposedly going to give me. It was deemed to be a garret t3 super turbo. Except the one he had did not have the thin plate bolted to the side of the housing yours has.

Post by **klattr1** » Fri Oct 14, 2005 8:06 pm

(foster, australian for "not sure what to do with this extra hole")

Post by **HolyShiznit** » Fri Oct 14, 2005 8:13 pm

klattr1 wrote:(foster, australian for "not sure what to do with this extra hole")

ROFLMAO

Post by **virus77** » Fri Oct 14, 2005 11:50 pm

klattr1 wrote:(foster, australian for "not sure what to do with this extra hole")

oh, and nice turbo

Post by **Structure240sx** » Sat Oct 15, 2005 3:46 am

klatt better watch out, i might finally use the rest of this photo for what it was meant for

Post by **240sxjeff** » Sat Oct 15, 2005 4:00 pm

klattr1 wrote:(foster, australian for "not sure what to do with this extra hole")

Holy $hit that has got to be the funniest thing I've heard all week LMAO

Post by **1WheelWonder** » Sat Oct 15, 2005 5:12 pm

Glad to here your having another go at it.

Post by **huguetpj** » Tue Oct 18, 2005 9:37 pm

Glad to hear your back on the race again. With a bitching turbo I might add...

And Holyshiznit almost made me pee my pants

Post by **dsylvia** » Wed Oct 19, 2005 5:32 pm

i have a ball bearing turbo and its not water cooled. its made by turbonetics though.

fiznat part II: step one

fiznat part II: step one

Re: fiznat part II: step one (fiznat)

Re: (Structure240sx)

Re: fiznat part II: step one (DrJuice164)

Re: fiznat part II: step one (fiznat)

Re: fiznat part II: step one (MS180SX)

Re: fiznat part II: step one (fiznat)

Re: (NISTECH)

Re: (NISTECH)

Re: (klattr1)

Re: (klattr1)

Re: (klattr1)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums