fixing reverse lights

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
alibaba
Posts: 6
Joined: Thu Aug 23, 2007 9:42 am
Car: 1995 nissan 240sx

Post

well i just put the redtop sr into my s14, and i need to wire up the reverse lights, i just wanted to know what color are the wires on the ka lower harness and which one is the sensor on the sr transmission.

i tryed searching and could int find itany help would be apreciated


User avatar
wzntha
Posts: 251
Joined: Wed Aug 30, 2006 11:37 pm

Post

.
Last edited by wzntha on Thu Sep 20, 2012 4:27 am, edited 1 time in total.

User avatar
Slideways^Jordan
Posts: 703
Joined: Thu Aug 16, 2007 11:24 pm
Car: 1989 240sx Coupe-1991 240sx Hatch back

Post

I would also like to know so i can wire mine up before my SR build is up an running.

User avatar
Hijacker
Posts: 14373
Joined: Wed Aug 13, 2003 4:57 am
Car: '92 240sx Convertible
'94 F-150
Location: Fredericksburg, VA

Post

Service manuals are your friends.

On the S13 subharness the Green/Blue and Green/White wires run to the reverse switch.

On the S14 plug, the Green and Green/White wires are the ones needed.

In both instances, the Green/White wire is what runs to the reverse lights, and the other wire (green or green/blue) are power supply wires to the switch.

This is assuming, of course, that you're putting this in a manual car. Autos require different procedures

alibaba
Posts: 6
Joined: Thu Aug 23, 2007 9:42 am
Car: 1995 nissan 240sx

Post

k cool thanks a lot ill gonna get under the car this week end and see what i can do

austins240
Posts: 410
Joined: Wed Sep 03, 2003 1:28 pm
Car: 93 240SX HB, 89 Rolla GTS
Contact:

Post

on the auto, it's the black and green wires on the transmission plug (big one, 6-8 wires?)

the rest of the wires can be removed from that plug. the speed sensor goes to another plug.


Return to “SR20DET Forum (rear-drive)”