First Time 1/4 Mile, Guesses?

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
drnovascotia
Posts: 33
Joined: Sat Feb 01, 2003 9:24 pm

Post

Well, I'm taking my 93 s13 witrh 117K to the track tomorrow.IntakeHeaderFull Cat-Back ExhaustLSD

Any Guesses? I'll post results tomorrow night

DrNoVaScotia


lessthanjakejohn
Posts: 4105
Joined: Fri Oct 25, 2002 6:39 am

Post

15.94

User avatar
Dano
Posts: 11535
Joined: Tue Oct 29, 2002 8:01 pm
Car: '05 Nissan Frontier Nismo CC
'95 Nissan 240SX base
Location: Kansas City, KS/ Phx, AZ
Contact:

Post

i already told u my guesses :D

-Dan

MainEvent212
Posts: 4182
Joined: Tue Mar 04, 2003 1:21 pm
Car: 95 Nissan 240SX SE w/ SR20DET+goodies

Post

16.4 ish for first run...either +1 sec reaction or redlight...lol

nissanrcer240
Posts: 1657
Joined: Sat Aug 31, 2002 5:22 am
Car: 90 Nissan 240SX SR20DET
Contact:

Post

15.95 :D the person whos closest gets it right, right??

BuudWeizErr
Posts: 4745
Joined: Tue Sep 24, 2002 11:35 am

Post

14.49 @ 97.56 w/ a 2.389 60'

Zydeco
Posts: 5129
Joined: Tue Sep 17, 2002 4:34 pm
Car: The poster formerly know as -]sTm[-HeavyHips
Location: left coast. USA.
Contact:

Post

19.8

nlzmo400r
Posts: 4904
Joined: Wed Feb 12, 2003 12:23 pm
Car: '02 Nissan Altima QR25DE
'93 Nissan 240SX hatch KA24DE

Post

15.8 @ 89mph

S13240
Posts: 1908
Joined: Fri Jul 26, 2002 8:06 am

Post

BuudWeizErr wrote:14.49 @ 97.56 w/ a 2.389 60'


How'd you get that time anyhow? What mods you got? Wanna hook me up with all your mods and where your an at?

I recently ran at Fontana and fastest was a 15.038 and trap speed was 93.64 mph. I have K&N filter w/ 2.5" custom crush bent exhaust. Car sitting on 16" Enkei RSE BFG T/A 205/55/16 all around with 20 psi in the rear tires; intrax springs w/ kyb gr2 struts and greddy front strut bar. Stock 7 psi with open differential. Spare tire and emergency jack was taken out. Other than that full interior. Oh yes and I do have a slipping clutch and exhaust leak hehe :)

S13240
Posts: 1908
Joined: Fri Jul 26, 2002 8:06 am

Post

Oh yeah I forgot to also mention that my 60' time was 2.730.

drnovascotia
Posts: 33
Joined: Sat Feb 01, 2003 9:24 pm

Post

so I went to the track tonight, all excited to race my 240 for the first time. Lemme give you my specs.93 hicas 240sxInjen intakeHotshot HeaderFull 2.25" cat-back echaust with magnaflow exhaust.Denso iridium plugsAutomatic transmission. I braked it and kept it @ 180 rpm'sTook out subs, back seat, spare tire, etc

I was embarassed, I ran a 178 and a 17.4. I Was excpecting around 16.1-16.5

60' was 2.762

Whats wrong with my car? What can I do to be in the 16's?

[email protected]

lessthanjakejohn
Posts: 4105
Joined: Fri Oct 25, 2002 6:39 am

Post

what tires are you running, truthfully did you do a ****ty job dragging?Maybe your transmission is falling apart.Maybe your transmission is just easting power.

I would get your car dynoed if I were you

User avatar
Dano
Posts: 11535
Joined: Tue Oct 29, 2002 8:01 pm
Car: '05 Nissan Frontier Nismo CC
'95 Nissan 240SX base
Location: Kansas City, KS/ Phx, AZ
Contact:

Post

drnovascotia wrote:I braked it and kept it @ 180 rpm's


u mean 1800rpm right?

-Dan

lessthanjakejohn
Posts: 4105
Joined: Fri Oct 25, 2002 6:39 am

Post

1800 seems a little low, did you not have a chance to try anything higher?

Silvia2b
Posts: 783
Joined: Mon Oct 28, 2002 9:33 pm
Car: 95 240sx se / 07 G35s cpe / 2009 G37s sedan (rear-ended R.I.P.) / 19 Q50 rs400AWD
Location: Portland,OR.

Post

whoops, man I don't know but 1800rpm, seems to me like that is only like idle w/ AC + maybe 650 gas,I'm no pro dirver but I'd stall my car trying a launch like that.

User avatar
JDM
Posts: 203
Joined: Mon Feb 10, 2003 1:32 pm
Car: Import Cars, Powerlifting

Post

Stall Converter is at 1800 RPM's for the stock auto transmission. Any higher and he could seriously damage it. With all those mods I'd definatly think youd be hitting at least mid-low 16's...

User avatar
Dano
Posts: 11535
Joined: Tue Oct 29, 2002 8:01 pm
Car: '05 Nissan Frontier Nismo CC
'95 Nissan 240SX base
Location: Kansas City, KS/ Phx, AZ
Contact:

Post

thats wat i told him, i thought the stall convertor was 1800...

-Dan

drnovascotia
Posts: 33
Joined: Sat Feb 01, 2003 9:24 pm

Post

I'd love to get my car dynoed, however lack all the $$ it takes to do that.

yeah, 1800 rpms is what I launched at. It seemed like it wouldn't let me revi t higher than that.

I'm looking into a manual swap, thats abnout all I can think of that will help without lots of money put in

DrNoVaScotia

BuudWeizErr
Posts: 4745
Joined: Tue Sep 24, 2002 11:35 am

Post

S13240 wrote:How'd you get that time anyhow? What mods you got? Wanna hook me up with all your mods and where your an at?

I recently ran at Fontana and fastest was a 15.038 and trap speed was 93.64 mph. I have K&N filter w/ 2.5" custom crush bent exhaust. Car sitting on 16" Enkei RSE BFG T/A 205/55/16 all around with 20 psi in the rear tires; intrax springs w/ kyb gr2 struts and greddy front strut bar. Stock 7 psi with open differential. Spare tire and emergency jack was taken out. Other than that full interior. Oh yes and I do have a slipping clutch and exhaust leak hehe :)
You should be doing better than that. You have aftermarket suspension too, you should be able to launch at least a little bit better than me. And I had everything in my car, spare, and even a toolbox. Do you have a frontmount? That might be the only thing. My tires are the same size too.

Message me on AIM or something, I couldn't go to Fontana, my master cylinder went out. I'll go next time though if you're going.

S13240
Posts: 1908
Joined: Fri Jul 26, 2002 8:06 am

Post

I don't have a fmic...I'm using the stock smic with stock bypass valve. But yeah I know I could have done better than that..

goshoryuken
Posts: 319
Joined: Sun Jan 12, 2003 2:17 pm
Car: Tuning, Dentistry

Post

19.8!!! LOL, someone said 19.8, **** . . . I'de take that as a dissssss

User avatar
I am Technoman
Posts: 979
Joined: Fri Nov 22, 2002 6:49 am
Car: ???

Post

r/t .68260 2.355330 6.6061/8 10.138mph 71.731000 13.1401/4 15.50189.65

that was an open diff.

User avatar
SilviaLuvr
Posts: 1295
Joined: Mon Dec 02, 2002 8:03 pm
Car: shopping for parts going to school to become a massage therapist

Post

my car is basicly stock (short ram injen intake custom 2.75 exhaust rebuilt KA24E with new clutch) running on 205 55 tires and gutted trunk. what do you guys thank

p.s im aslo getting my eibach pros and kyb gas shock put on 2morrow

lessthanjakejohn
Posts: 4105
Joined: Fri Oct 25, 2002 6:39 am

Post

seeing what he just ran, 43 secs

K1LLA916K
Posts: 252
Joined: Thu Apr 17, 2003 8:56 pm
Car: 2003 nissan sentra gxe

Post

i can run a quarter mile in a minute and eleven seconds.......does that count?

Nathan
Posts: 5629
Joined: Fri Mar 07, 2003 6:43 am

Post

no

User avatar
Dano
Posts: 11535
Joined: Tue Oct 29, 2002 8:01 pm
Car: '05 Nissan Frontier Nismo CC
'95 Nissan 240SX base
Location: Kansas City, KS/ Phx, AZ
Contact:

Post

Nathan wrote:no


:Werd, no that doesnt count, this is an automotive forum :sad lol

EDIT: 1500 posts :ylsuper

-Dan

solid
Posts: 368
Joined: Tue Jul 23, 2002 8:14 pm

Post

i can run my 1/4 mile in 54 seconds!

User avatar
ColumbusDrift
Posts: 208
Joined: Mon Jun 30, 2003 5:59 am
Car: 96 S14 KA24DET

Post

Last nite was my first time taking my 1993 Nissan 240SX liftback to Milan Dragway in Michigan. My first time was 16.72 at 79mph and my best of the next three came in at 15.93 at 86mph. I was pretty happy with this time and mph. BTW my car is bone stock with not a single mod only an oil change and deletion of spare and jack and 50% tread tire wear.

User avatar
ColumbusDrift
Posts: 208
Joined: Mon Jun 30, 2003 5:59 am
Car: 96 S14 KA24DET

Post

BTW, does anyone know the horsepower/ quarter-mile/top speed mathmatical conversion to find the horsepower for your car. My friend said there was a way to find this out. Maybe he and I are nuts. Any help would help.


Return to “240sx General Discussion”