First Mods Done

[M35-Brad]

Added the Spoiler, Midnight Grille and Tanabe Axle backs this weekend... just showing off my pride.






Brad

[zerg711]

How do you like your tanabes? It was too quiet for my taste so I slapped on Megan mid pipes and beefier y pipe from my fx35.

You can do a search on YouTube for my car under m35 tanabe to get an idea of the sound. I am pretty sure this was before I slapped on other crap on my car.

[M35-Brad]

Definitely quieter than I wanted...but the look is too nice to pass up. Megan mids and MotorDyne XYZ is next...hopefully that will open it up a bit. In summary, I totally dig the Tanabe Axle-backs.

[zerg711]

Yah, I like them as well. Mid pipe will definitely open her up right away. You should start with Mid pip then do Y pipe later.

The order I did my modification was:
1) Lowered - Tein H tech (was perfect for my needs)
2) Window visor
3) Roof and Trunk spoilers
4) Couple of little interior goodies
5) Tanabes
6) Megan Midpipe + FX Y pipe
7) Fujita Intake
8) Volk Racing GT-C 20s
9) Replace trunk spoiler to OEM spoiler.
10) Motordyne 5/16 spacer.

I hope you enjoy your future modification as much as I did. I think I'm done playing with this car for now.

I think you should lower car first before you finish your exhaust.

[M35-Brad]

Hey Zerg,

Def agree with the lowering; I hate the 4x4 look of the front. Question: what did you do for camber alignment : Eibach, Updated bolt or leave camber slightly off?
I'm thinking go with the Eibach in case I get some weird sense I want it lower in the future.

For the rest of the list:
1) 100% agree on the H-techs, since this is the daily driver and my driveway is steep enough as it is...
2) Megan Mids
3) Motordyne XYZ
4) Berks HFC
5) DynoTune
6) 20x8.5/20x10 Wheels (Vossen CV3's, CV4's, or other TBD)

I think I am out of luck on the spacer and Intake due to my engine being the 09+ HR motor - but I'm ok with that

I will probably leave it alone after doing all of that and work on the track car next.

[InfinM3506]

Hey Zerg,

Def agree with the lowering; I hate the 4x4 look of the front. Question: what did you do for camber alignment : Eibach, Updated bolt or leave camber slightly off?
I'm thinking go with the Eibach in case I get some weird sense I want it lower in the future.

For the rest of the list:
1) 100% agree on the H-techs, since this is the daily driver and my driveway is steep enough as it is...
2) Megan Mids
3) Motordyne XYZ
4) Berks HFC
5) DynoTune
6) 20x8.5/20x10 Wheels (Vossen CV3's, CV4's, or other TBD)

I think I am out of luck on the spacer and Intake due to my engine being the 09+ HR motor - but I'm ok with that

I will probably leave it alone after doing all of that and work on the track car next.

Hey if your looking for a good Deal on Vossen's with Tires let me know I get a good Deal thru my Buddie. You can check my pricing against your local dealers. Just let me know what your looking for and I can get you some pricing.

[DoN_BLaZe34]

Car is looking good. Any other pictures of the spoiler? Is it the OEM one?

[M35-Brad]

Hey Don

It is the OEM one for the 08+ body. I'll post a few more pics in a few days.

If you are thinking about getting one, install is pretty simple if you have patience and are willing to measure, measure, measure and measure again. Drilling holes in a perfectly good trunk is a nail biting, but worth the end result. The OEM one comes with a template and detailed instructions.

If needed ill post the step by step with pics...

[M35-Brad]

Hey Zerg,

Def agree with the lowering; I hate the 4x4 look of the front. Question: what did you do for camber alignment : Eibach, Updated bolt or leave camber slightly off?
I'm thinking go with the Eibach in case I get some weird sense I want it lower in the future.

For the rest of the list:
1) 100% agree on the H-techs, since this is the daily driver and my driveway is steep enough as it is...
2) Megan Mids
3) Motordyne XYZ
4) Berks HFC
5) DynoTune
6) 20x8.5/20x10 Wheels (Vossen CV3's, CV4's, or other TBD)

I think I am out of luck on the spacer and Intake due to my engine being the 09+ HR motor - but I'm ok with that

I will probably leave it alone after doing all of that and work on the track car next.

Hey if your looking for a good Deal on Vossen's with Tires let me know I get a good Deal thru my Buddie. You can check my pricing against your local dealers. Just let me know what your looking for and I can get you some pricing.

Hey Infin,

I will be hitting you up in the future. Do you know if the CV3's come in 20x10? All I see are the 10.5's.

[InfinM3506]

Ya the CV3's come in 20x10 as well. 20x8.5 and 20x9. But if your doing all around this weekend I was going to mock my rear up front and see.

[DoN_BLaZe34]

I never knew you could get Vossens in a 10 inch width... that's good to know

[06M4.5]

Not all Vossen come in 10"

I think the CV3's are 20x10 et45 only