finally started, ran into some issue

[b-13det]

"is finally 40 degree today" i started just to mount up my intercooler/pipings on my b-13 93' se-r. mounted up the intercooler up and the cold pipe up just fine. but i ran into some issue on my hot pipe side seem like there no space to go around anywhere. if anyone have pic and how to pipe it around the AC, i be happy to hear back from u guyz
Modified by b-13det at 5:58 PM 12/29/2008

[RED_DET]

Front Mount setup? Which way do you have the turbo clocked, hot side going up or down?

[hmong1inc]

is going to be a front mounted intercooler. and hot pipe is straight up

[hmong1inc]

dang i was on my brothers computer, but hmong1inc was b-13det for that post and this one. SRY

[RED_DET]

You will have to run the pipe over towards the overflow bottle, which will have to be moved. You will have to cut a hole where the bottle was and run the pipe down and forward and then over to the endtank.

[hmong1inc]

to make a hole there i have to remove the windshield wiper tank? cause if i cut straight in where the overfill is, is right on the frame. if i do replace the wind shield wiper tank can i just relocate or get a smaller one from a specific car?

[RED_DET]

Yes you have to remove it and relocate it or not have one. I removed mine, but I don't daily drive the car.

[treymeiste]

.

[b-13det]

ok ty i got it mounted just right now, now i got to mount up the manifold and the turbo. thanks really much RED