Fighting corrosion on used coilovers

[LiteraryCannon]

delete
Modified by LiteraryCannon at 11:52 PM 6/16/2007

[180fan]

Wire brush on a dremel tool should do just fine. Nothing too coarse or hard. Just take the rust off and spray on some WD-40 on the surface and pat dry.

[LiteraryCannon]

delete
Modified by LiteraryCannon at 11:53 PM 6/16/2007

[KFL]

yep what he said.. I used a craftsman carbon wire brush cup on a power drill cleaned off all my corroted/oxidized tension rod/shock bolts. I would possibly also spray a thin..layer of rustoleum on the bottom base.I would do it if you were local enough. I just got silkroad but newer version Here are my bolts.http://home.comcast.net/~kfl007/bolts.jpg