Few questions about rims for my coupe.

A General Discussion forum for Altima owners, and a great place to introduce yourself if you are new to the NICOclub Altima Forums!
User avatar
yea-its-an-altima
Posts: 17
Joined: Sat Nov 03, 2007 8:07 am
Car: 2008 altima Coupe

Post

im looking to buy a set of wheels for my ac. but i was wondering wat color? im looking at a set of black wheels wit a polished lip. in 18s. but what offset and width is best for our cars?? i looked around on the forum and i hope this question hasnt already been asked and im just over looking it. thanks again guys!!


User avatar
mcheddadi
Posts: 6666
Joined: Thu May 17, 2007 2:24 pm
Car: R8

Post

If you have a 3.5SE then you can go all the way to 8.5 rim width , +35 offset and 245 tire width (those have been confirmed here) and you'll still be able to drop without rub with the eibach springs...with a 2.5S I don't know, a lot of people seem to rub if they go too far from +45 offset and 225 width.

and for the color it really depends on your car color and where you want to go with the color scheme

User avatar
yea-its-an-altima
Posts: 17
Joined: Sat Nov 03, 2007 8:07 am
Car: 2008 altima Coupe

Post

yea i have a 3.5 and how does the offsets work is +35 bigger than +45 or visa vursa. and wat color rims?? my ac is white.

User avatar
mcheddadi
Posts: 6666
Joined: Thu May 17, 2007 2:24 pm
Car: R8

Post

offset works like this, +45 is 45 mm from center of rim and +35 is 35mm from center of rim, so the lower the offset the further the wheels stick out form the car.

with white you can go with any color you want, they all look good! Bronze, gold, white, black, silver, chrome. It's up to you! Maybe some other members with White A/C will pitch in for car color advice

User avatar
adidas2go
Posts: 4495
Joined: Thu Oct 18, 2007 9:49 am
Car: Cycle through all kinds of cars, trucks, motorcycles, and boats 🤙
Once upon a time: 1st turbo Altima Coupe
Location: Raleigh, NC

Post

also a lot of these questions can be answered on

Shift_Altima
Posts: 555
Joined: Mon Jan 07, 2008 1:30 pm
Car: 2008 altima coupe 2.5s 6 speed

Post

For a black car.. I'd say black with a chrome lip only because I don't like everything to black.. I prefer the chrome edge. I really liked hyperblack on the gray cars (someone did it i forgot who) and another guy who has red did all black without a chrome lip which also looked really really good. I like blacknwhite's color scheme with a whit ecar and black rims.. I really don't like bronze rims though. Just persoanl preference. Do what you like though. I did what I like and I love it.. some hate it but some love it. It all boils down to what you think looks good and go ahead and do it.

generic808
Posts: 2537
Joined: Tue Jul 10, 2007 10:18 am
Car: '08 Infiniti G35 S
'10 Infiniti EX35

Post

If you want exact OEM specs, which I'd recommend, you'd go with a 18x8 235/45/18. Anywhere from a +45 to +35 should clear.

User avatar
6sp3.5
Posts: 60
Joined: Sat Feb 02, 2008 6:26 pm
Car: 08 Altima coupe

Post

I have ASA AR1 blacks on my coupe.The Tire Rack has a selection of the rims you discribe.

User avatar
LongBeachCoupe
Posts: 9482
Joined: Thu Aug 23, 2007 1:43 pm
Car: 08 Altima Coupe (RIP Hurricane Sandy)
2005 Lexus RX

Post

SaY IT AINT SO
mcheddadi wrote:If you have a 3.5SE then you can go all the way to 8.5 rim width , +35 offset and 245 tire width (those have been confirmed here) and you'll still be able to drop without rub with the eibach springs...with a 2.5S I don't know, a lot of people seem to rub if they go too far from +45 offset and 225 width.

and for the color it really depends on your car color and where you want to go with the color scheme
Check my sig... 245/35/20 38+ on a 2.5 with eibach drop and the only thing that rubs is the ladies when they see my ride!

User avatar
amitlaCOUPE
Posts: 12
Joined: Sat Jul 12, 2008 8:46 pm
Car: Dark Slate Altima Coupe 2.5

Post

I have a quick question. I was planning to get some OEM 18' is250 rims. Will they fit my altima coupe 2.5?


Return to “Altima General Discussions”