i've got a a set of chrome sterns specs are 19x8.5 and 19x9.5 35 et up from and 25 out back. Conservative but decent for a set to not have to modify your fenders for until you're ready to hook up with the wheels you intend to run for a while.
They have 275 35 19 rubber out back too. I've got about a credit cards thickness between my rear tires and rear fenders. Of course I'm not rolled or pulled but it actually doesn't rub on my y33.
So, I'm reviving an old thread. I am going to try and roll my fenders tomorrow just before getting an alignment done. Heat gun, fender roller, and a lift will all be present. So, this should be pretty easy.
pics or it never happened... j/k... i had a hard time on the rears of my friends black g50... but working the metal slowly, using a heat gun, and i rolled and pulled that biatch, and you probably wouldnt be able to tell... same with the fronts... he is slammed on 18s with low offsets so its kinda like 19s with low teen offsets... show some pics...
I will get some detailed pics, but they suck, majorly. TBrack saw them this weekend. I just had to do the front since that's where my main issue was. I am running stock Murano wheels, so they're nowhere near aggressive. I used a heat gun, still cracked. I already had some damage to the fenders due to faulty valves, so when I rolled them they went to crap.
Good thing I came in here.My front tires area 16x7 with 15mm spacer and somehow the fenders pulled themselves while I turned.They look dope but I need more since I still rub.The rears just need camber and some pull.Hope did see your out come then I might jump on the risk train. I just white primer my chipped paint since I'm ready for a future paint job.
edit:My front lip on the front fender pulled out.So it has like a dope slope and if you look at it close seems like some bondo can remove the crease that forms that lip.I'll get pictures later.
Thats weird everyone says Air is better but Coils seem so much less bouncy but I need my fender pulled anyone know of places in NorCal? Around Sac? Running on Coils but I feel 10 Feet in the air without a Fender pull to clear
Postby
1QIKQ45 »
https://forums.nicoclub.com/1qikq45-u146969.htmlTue Dec 22, 2009 12:47 pm
Bringing up an old thread again.BUT, a question for Tibbs.
jltibbs wrote:Air, until tomorrow. Air sucks.
What were your reasonings behing this statement?And what set up were you using fo ryour management? I know u had the chapmans, but for pumps, valves, Line size, Ect?