fender removal

Post by **Toms240420** » Mon May 17, 2004 5:29 pm

I am looking to take off the fender on a 91' 240. I just wanted to know how hard it is and is there anything i should watch out for. thanks for any info.

Post by **180fan** » Mon May 17, 2004 5:29 pm

there are like 5 bolts between the bumper and the fender in the front, I get to those from the under side, the bolts at the top of the fender, another one next to the door behind the wheel well, and another one at the top of the fender just in front of the door.

Post by **Toms240420** » Mon May 17, 2004 5:29 pm

so just a few bolts to find and it will come off pretty easy?

Post by **corn322** » Mon May 17, 2004 5:29 pm

Post by **PhaneSoul** » Mon May 17, 2004 5:29 pm

cool, gotta remember this when i replace mine.... another reason friends dont let friends drive their cars....

Post by **XCrunner19420** » Mon May 17, 2004 5:29 pm

Make sure you do NOT remove the bottom 2 bolts last, b/c if you do theres a good chance that the fender will fall off and be bent.

Post by **SilviaS14KA24DE** » Mon May 17, 2004 5:29 pm

you need a FSM picture? I have one if you need it.

Post by **PhaneSoul** » Mon May 17, 2004 5:29 pm

Post by **SilviaS14KA24DE** » Mon May 17, 2004 5:29 pm

Post by **SilviaS14KA24DE** » Mon May 17, 2004 5:29 pm

you probably want to save it, and open it in the windows file and fax viewer, then kinda zoom in to read the words or see the parts if you have to.

fender removal

fender removal

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums