FAO---slw240sx

[skoob240]

:help Nice to hear that you're making progress with your CA. I have a question for you about wiring. Did you have to wire in an ignition coil relay? If you could give me any ideas on how your harness is wired up to the relay box, i think it would help me a lot. My problem to begin with was that when i first tried to start my engine I had no spark nor were the injectors working. I'm wiring in an ignition coil relay. I can hear the injectors clicking now when i spin the CAS, but still no spark. Any help is better than none. If you have an idea please let me know. Thanks.

[slw240sx]

man i wish i could tell you but i didnt have to touch the wiring on my it was done by a previous owner ! ill takl to some people and try an figure it out for yah !!

[skoob240]

Thanks. Somebody really needs to do a write-up on a complete KA to CA swap. If I can figure out this wiring problem I'll break out my digicam and write one up myself.

[cuzan0]

here dude try this link,i used it to wire up my car and i runs fine...... http://home.nycap.rr.com/hhots...y.jpg

[slw240sx]

thats from an Sr wire up on heavy throttle, and yes it works the guy who did have this wired used this diagram too and yes somebody needs to do a write up on alot of Ca things... please sombody i need it please

[skoob240]

Ack. That diagram isn't working for me. In fact unless I connect the brown wire on the E10/F10 plug my injectors don't work. I guess you guys had SOHC engines before you swapped in the CA? I need to find an fsm for the DOHC s13. This car is making me sick. But I can't stop now.

[cuzan0]

i used that on my 92 240sx it had the ka24de dual cam and i know it works cos i am driving mine now

[koop]

i used that wiring diagram on my '89 n it works just fine.. i just gotta figure out why my car is idling bad..

[slw240sx]

my car is just plain problemns from idle to boost spike to not starting now to running really rich !!! ahhh im about to shoot it for reall

[skoob240]

I still haven't figured it out. I did an ECU code check and I got code 21--Ignition signal missing in primary coil--I know its probably something simple, that will make me want to kick myself when I figure it out. Ideas anyone?