other motor set up went with car.. time to build this... no longer for sale
Modified by S@nt0s at 12:39 PM 2/9/2009
** F/S CA18det Swap** SOCAL
-
ca18detgabby
- Posts: 3329
- Joined: Sat Feb 10, 2007 5:31 pm
- Car: 92 Nissan S13 ca18det SOLD
03 Infiniti G35 - Location: lake Mary FL
- Contact:
Re: ** F/S CA18det Swap** SOCAL (S@nt0s)
going to be alot easier to sell with some pics, and what is the status of the harness? what about ECU?
Re: ** F/S CA18det Swap** SOCAL (ca18detgabby)
comes with harness, but no ECU as i was running a LT8 Microtech standalone
Re: ** F/S CA18det Swap** SOCAL (S@nt0s)
here are the pic i have. it is complete tho just tagged and bagged a few things
transmission
arp head studs
intake
head
block
new main and rod bearings
ARP rods bolts for OEM rods
water pump has maybe 50 miles on it.....
transmission
arp head studs
intake
head
block
new main and rod bearings
ARP rods bolts for OEM rods
water pump has maybe 50 miles on it.....
-
zero_gripS13
- Posts: 619
- Joined: Sat Oct 16, 2004 6:15 am
- Car: soon to be 95 s14 hopefully
Re: (r34 gtr)
in you pice it says arp head studs but those r oem bolts...
those rod bolt of ebay i was wondering what they looked like
also something was leaking coolant bad by hints of the brown **** all over the block and intake manifold...
those rod bolt of ebay i was wondering what they looked like
also something was leaking coolant bad by hints of the brown **** all over the block and intake manifold...
Re: (zero_gripS13)
zero_gripS13 wrote:in you pice it says arp head studs but those r oem bolts...
those rod bolt of ebay i was wondering what they looked like
also something was leaking coolant bad by hints of the brown **** all over the block and intake manifold...
yup you are correct, wrong bag .. sorry... i cant find the other bag with my headstuds in them...zero_gripS13 wrote:in you pice it says arp head studs but those r oem bolts...
those rod bolt of ebay i was wondering what they looked like
also something was leaking coolant bad by hints of the brown **** all over the block and intake manifold...
the rod bolts i got from ARP myself and i also ordered a set off ebay to compare to ensure they were the same ones. i sold 1 set and still have this one.
the brown is from the collant yes, but from when i removed everything ... it wasnt because of a malfunction or any kind
Re: (DALAZ_68)
emailed u310.227.5575
-
zero_gripS13
- Posts: 619
- Joined: Sat Oct 16, 2004 6:15 am
- Car: soon to be 95 s14 hopefully
Re: (S@nt0s)
just keeping u on your toes..
gotta watch out for my nico family :P
gotta watch out for my nico family :P
Re: (zero_gripS13)
thanx, i need this sold and then the $ will go for for my Z32 transmission for my SR and narrowing and beefing up my rear end for the datsun. im looking to run in the 9's by end of summer
awwww man.... too bad you bailed. It would've been refreshing to see someone in the u.s. push the little CA18... to paralell the 1.8 rollas over at 3TC.com. This sure was a platform for some quick ETs.Did you submit to peer pressure ? - lol
Curious why such a minimal jump to the SR instead of straight to the KA24... which could get your 9s with a stock top end... heck probably stock innards too & without spray.How much power u reckon needed to get your goal ?As some of the street rolla guys are hitting 35+ mpg and 9sec ETs with stock top end RZs.... yours would've been a nissan counterpart.Good luck anyway
Curious why such a minimal jump to the SR instead of straight to the KA24... which could get your 9s with a stock top end... heck probably stock innards too & without spray.How much power u reckon needed to get your goal ?As some of the street rolla guys are hitting 35+ mpg and 9sec ETs with stock top end RZs.... yours would've been a nissan counterpart.Good luck anyway
Re: (dash)
thats funny you say that, i have no reason other then the fact that i have a perfectly running SR here in my S13 that i am parting with anyways.dash wrote:awwww man.... too bad you bailed. It would've been refreshing to see someone in the u.s. push the little CA18... to paralell the 1.8 rollas over at 3TC.com. This sure was a platform for some quick ETs.Did you submit to peer pressure ? - lol
Curious why such a minimal jump to the SR instead of straight to the KA24... which could get your 9s with a stock top end... heck probably stock innards too & without spray.How much power u reckon needed to get your goal ?As some of the street rolla guys are hitting 35+ mpg and 9sec ETs with stock top end RZs.... yours would've been a nissan counterpart.Good luck anyway
3tc... hahah that you menstion that. im a 3tc guy myself.. RAISED with the lil hemi all my life. pops has a 69 corolla running in the 9's with a auto trans. but just this week made the decision to go with the RZ and a new chassis. I believe i am more tehm capible of propelling teh CA to being the FASTEST in the U.S but with so much going on i can have the car on the track faster just going with my stock SR and throwing my T04E i have here on it .i will only need 400-450ish whp to get me where i want to be that is with my chassis dialed in and everything else in good working order.
we will see how things pan out as if no one buys this or my S13 i might just keep the S13 as my street car with the SR and leave teh lil datsun with the CA...
Re: (DALAZ_68)
$500 no transDALAZ_68 wrote:any chance you willing to sell without the transmission...i mean i wouldnt mind having a spare transmission, but id have to take apart that bell housing and dump a diff gear box on it...
-
BACARDI_DWB
- Posts: 377
- Joined: Mon Jul 31, 2006 7:44 am
Re: (BACARDI_DWB)
sorry no shipping on it, if you wan you can just come pick it up, no time to meet half way.$400 for the head complete...BACARDI_DWB wrote:how much for the head shipped to san diego, or if you want to meet halfway or something?
arp headstuds too.
Re: (BACARDI_DWB)
PP me monen and ill put the money for the block, u pick up at my houseBACARDI_DWB wrote:how much for the head shipped to san diego, or if you want to meet halfway or something?
arp headstuds too.