Extreme Dimensions needs YOUR car!!

[Extreme Dimensions]

Hey Everyone,

My name is Geoff. I am the Marketing and Sponsorship Coordinator with Extreme Dimensions. We are in need of cars for prototyping. Let me explain the process a bit first:

When we get your car, I personally do a thorough inspection of the vehicle and document any imperfections found. Any imperfections that are additional beyond what I find when you get the car back, we take care of for you. We also go over some more paperwork (that you get copies of) explaining what we are using your car for, and what you will get in exchange. We then take your car in for prototyping. Prototyping takes roughly 1-2 weeks to complete. After that stage is done, you take your car back.

***NOTE – You will NOT be getting the OEM pieces back that we use for prototyping. This is typically your front bumper, rear bumper, and side skirts. If we decide to do a hood, trunk, wing, or fenders you will NOT get those back either. So, it is best if this car is NOT your daily driver.

Once we send the parts to our manufacturer, the turn around time to get parts back is roughly 3 months.

The cars that we are specifically looking for right now from NICOclub.com are:08-09 Infiniti G3797-01 Infiniti Q4584-89 Nissan 300ZX89-94 Nissan Maxima08-09 Nissan GTR (worth a shot asking…)87-90 Nissan Sentra07-up Nissan Sentra

***This would be a fantastic opportunity, and kick off if you have dreams of getting your car into SEMA 2008 (for the G37 and GTR)*** Please contact me directly for more details. My direct e-mail is:[email protected]

Thanks so much everyone!

[tigersharkdude]

not sure if i read right. for 2 weeks you would have my car( understand that) but i would have no bumpers for 3 months. if you took my car for 2 weeks and my bumpers were still there when i got the car back sweet. if thats the case than im in. but i cant go 3 months without my max it would kill me

[Extreme Dimensions]

Yea, unfortunately, you had it right the first time. We use your car for about 2 weeks to make our parts, then you get the car back without bumper for about 3 months. What the heck right? Let me tell you why.

In order tog et the best possible fitment, we use your OEM bumpers. We take the bumper, and chop it right in half. We keep the OEM part on the car, and build down from there. That way we retain all of the OEM mounting points for you. So right away, you can see why you wont get your parts back. We do the same with the front bumper, rear bumper, side skirts, fenders, hood. The trunk, and wing would be sent along with the modified parts to our manufacturers to have molds made. The mold making process is very rough on parts. 9 times out of the 10 the parts are destroyed after making a few molds. The other times, they are very disfigured. So much, that they just are able to be used anymore. But, when all is said and done, you get all of the replacement parts at no cost to you.

It's asking a lot. We know that. But, we have been in business for about 8 years. We have done this process from day 1. Its just a matter of time before we find someone that is willing to let us turn their car in to a show stopper

Please let me know if there are any other questions. I would be more than happy to answer them for you.

[ZGadson]

If we got some say in what we wanted the kit to look like, Id be more apt participate. If we were able to keep a kit I'd be even more interested. Not only would it be advertizing for your company, but it would show other's what the kit looks like.

[Extreme Dimensions]

ZGadson - Oh of course you are able to have a say in what the kit looks like. We would prefer that you tell us what you want. We have ideas, but that doesnt mean anything unless the end user likes it...that's all of you. So give us ideas!!

Of course you get all the replacement pieces for free. Because we use your OEM parts in the making of our parts (thus you dont get your OEM parts back), you car would be awefully bare without replacement parts from us. You would at least get a 4-piece kit from us, and depending on whether we do them: a carbon fiber hood, trunk, and Duraflex fenders.

[Gman8990]

You only have certain cars listed so these are the only ones you will take, correct? And if i wanted in how would i get my car from TX to CA? What do you think the kit would look like?

[audtatious]

Good luck guys

As you are only looking for 3rd-gen Maximas at this point, will you be looking for other cars in the future?

[Extreme Dimensions]

GMan - Correct. As of right now, the ones on the list are the ones we are looking for. Of course, this list is much bigger, but I just included the cars that are relevant to NICO. This list is constantly growing though. If you want a particular car to be pushed up the list faster, show us the interest behind it. If wwe see a big demand for something, we meet that demand pretty quickly.Getting the car here is up to you. Typically, the people involved are so close to us that it has never been an issue. I suppose if you drove the car here, then we might be able to hang on to it for you for the 3 months. Then when the parts are back to take it to a shop to get everything installed, and painted. From there, you would just need to find a way to come out and collect your car from us.The look of the kit is still up in the air. Right now I am gathering cars to use. The first car that I can use on the list, we will design the kit for, and run with it from there. So if you are game, let me know so that I can get going on the rendering for you.

Audtatious - Yea, like I said, that list is constantly expanding. Get interest going on a car that you want done then show it to me.

Thanks guys!

[jltibbs]

Why do you have to beat around the bush on both my cars man? On the Y33 are you offering to build VIP style kits or are you pulling some F & F type stuff??

[rakonismo]

delete*
Modified by rakonismo at 12:32 AM 5/14/2008