exhaust leak

Post by **skoolymarm** » Sat Apr 09, 2005 2:18 pm

i got a really bad leak at the turbo manifold and i cantbuild boost for crap. i checked the crossover parts list andtook the part number for the gasket to Advance Auto and some other placesand they could find anything under that number(14036-D4201).

Can some one give me the right part number for the square gasket that goes in between the exhaust mani and the exhaust tubine? thanks

Post by **NeedCAforS13** » Sat Apr 09, 2005 2:57 pm

Alot of auto parts stores don't carry that gasket... I also tried ordering it from Advance Auto and they looked at me funny when I said I needed a turbo to manifold gasket.

However if you go to a Nissan Dealer, they can order the part for you. Ask for the turbo to manifold gasket from a 1991-1996 z32 300zx Twin Turbo. It is a metal gasket and should run you somewhere in the $20 range.

Sean

Post by **pulsar gtr** » Sat Apr 09, 2005 4:29 pm

As NeedCAforS13 said, 1990-1996 Nissan 300zx Z32 twin turbo use the same gasket.Part number 14415-17M00I have used it many times on few turbos.

Good luck,PULSAR GTRRafi

Post by **skoolymarm** » Sat Apr 09, 2005 5:15 pm

tight...then if nissan has it i will get it. has anyone taken the manifold offwhile the motor is still in the engine bay?

Post by **NeedCAforS13** » Sat Apr 09, 2005 6:53 pm

yes. Its a pain, but it can be done... I've also pulled the head to change a headgasket, and pulled the head, oil pan, and pistons to fix a cracked DE piston There's very little that can't be done with the motor in the engine bay!

Sean

Post by **skoolymarm** » Sat Apr 09, 2005 9:47 pm

NeedCAforS13 wrote:yes. Its a pain, but it can be done... I've also pulled the head to change a headgasket, and pulled the head, oil pan, and pistons to fix a cracked DE piston There's very little that can't be done with the motor in the engine bay!

Sean

damn!!

Post by **float_6969** » Sun Apr 10, 2005 6:43 am

That's the nice thing about the CA, it doens't take up any space in the engine bay!

Post by **cadet** » Sun Apr 10, 2005 10:29 am

spl parts has some nice high quality metal ones that aren't too much, their shipping is usually quick too.I have 2 extra ones laying around, if you want one let me know.

Post by **skoolymarm** » Mon Apr 11, 2005 6:35 am

cadet wrote:spl parts has some nice high quality metal ones that aren't too much, their shipping is usually quick too.I have 2 extra ones laying around, if you want one let me know.

i might have to hit u up for one if nissan doesn't have any.

Post by **cadet** » Mon Apr 11, 2005 7:10 am

ok, they charge $14 each plus shipping, I'll do $10 shipped per gasket.

Post by **skoolymarm** » Mon Apr 11, 2005 6:46 pm

i just ordered them from nissan

exhaust leak

exhaust leak

Re: exhaust leak (skoolymarm)

Re: (NeedCAforS13)

Re: (cadet)

Re: (cadet)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums