BUH BYE HEAT STAINED TIPS!

All things Altima Coupe.
User avatar
Irvxing
Posts: 545
Joined: Wed Jun 29, 2011 9:48 am
Car: 2011 Altima Coupe 2.5s M/T
Location: Houston, TX

Post

SEismyG wrote:You need to take an hour out of your day and do this: Grab a suit that you don't wear that covers your WHOLE body, a full face protector, safety glasses, gloves, socks, boots if you have some, an electric flyswatter if you have one, and a can of Raid and kill those f****** annoying Cicadas!!!

Hardly heard the exhaust. Sounds raspy on my comp but those tips look crazy in black. Much better than those fake ISF tips that aren't even connected... :chuckle: :dblthumb:

$500 is still alot for tips though... :eek: Muffler shop couldn't weld some together?
Checked the garage i got 7/8 of those things. Missing the socks :facepalm:
Bo daggit i didnt pay 500 for the tips :rotflmao
I will get a better clip tonight or tomorrow! :yesnod


mikethemike
Posts: 852
Joined: Thu Feb 24, 2011 11:40 pm
Car: 2010 Altima 2.5s w/ convenience package
Location: Burbank, Ca

Post

I tuned out the bugs and heard the exhaust pretty well. I love its start up. I was wondering if I should change out the nismo axle-back with those magnaflows. Then again, I dont wanna have to do that to a Nismo catback since they are enough to find

User avatar
Irvxing
Posts: 545
Joined: Wed Jun 29, 2011 9:48 am
Car: 2011 Altima Coupe 2.5s M/T
Location: Houston, TX

Post

mikethemike wrote:I tuned out the bugs and heard the exhaust pretty well. I love its start up. I was wondering if I should change out the nismo axle-back with those magnaflows. Then again, I dont wanna have to do that to a Nismo catback since they are enough to find
[youtube]http://www.youtube.com/watch?v=4TM58pTXjoo&feature=plcp[/youtube]
Had someone rev my car and got a better sound clip.
These revs are ALL 4k rpms and up (When the CVVT really opens up) I will do a low rpm rev vid as well :)
If you run a new axle back remove the Nismo axleback completely and just have a new one rebuilt so the nismo is left untampered.

User avatar
SanoSuKe
Posts: 1704
Joined: Wed Nov 02, 2011 8:26 pm
Location: New Jersey

Post

sounds like a beast! sounds better than a lot of 3.5'ers I've seen. Well done bro!

AlexN09
Posts: 1051
Joined: Sat Jun 11, 2011 7:07 am
Car: 2011 Nissan Altima Coupe S 2.5
Location: Nashville, TN

Post

Uggghhhh I loved those chrome tips man. Now I lost my appetite, no more yummy

User avatar
Irvxing
Posts: 545
Joined: Wed Jun 29, 2011 9:48 am
Car: 2011 Altima Coupe 2.5s M/T
Location: Houston, TX

Post

SanoSuKe wrote:sounds like a beast! sounds better than a lot of 3.5'ers I've seen. Well done bro!
Thanks :gapteeth:
:gapteeth: cant wait till its broken in goood.
AlexN09 wrote:Uggghhhh I loved those chrome tips man. Now I lost my appetite, no more yummy
C'mon!
Y you no like?
:eek:
See they look good in daylight. But if you disaprove il grab the sand paper and sand away :chuckle:
[youtube]http://www.youtube.com/watch?v=uJ-SByHKXPo&feature=plcp[/youtube]

User avatar
SanoSuKe
Posts: 1704
Joined: Wed Nov 02, 2011 8:26 pm
Location: New Jersey

Post

should rev it a little bit harder man! let that s*** backfiree!! lol

User avatar
Irvxing
Posts: 545
Joined: Wed Jun 29, 2011 9:48 am
Car: 2011 Altima Coupe 2.5s M/T
Location: Houston, TX

Post

SanoSuKe wrote:should rev it a little bit harder man! let that s*** backfiree!! lol
The night time vid i did was all high rpm revs.
Lol wanted to rev it high but a cop was scoping me out. :cool:
I'll get a better vid up later with lower revs and high revs :dblthumb:
drive by/take off as well.
Lets hear that GREDDY!

AlexN09
Posts: 1051
Joined: Sat Jun 11, 2011 7:07 am
Car: 2011 Nissan Altima Coupe S 2.5
Location: Nashville, TN

Post

haha no no don't sand it off! It sounds great to me and I wish I had a custom exhaust !!

Millhouse14
Posts: 35
Joined: Mon Feb 20, 2012 4:14 pm
Car: 2012 Altima coupe

Post

Love the tips. Well done man

User avatar
Irvxing
Posts: 545
Joined: Wed Jun 29, 2011 9:48 am
Car: 2011 Altima Coupe 2.5s M/T
Location: Houston, TX

Post

AlexN09 wrote:haha no no don't sand it off! It sounds great to me and I wish I had a custom exhaust !!
Too late i have begun :ohno:
Millhouse14 wrote:Love the tips. Well done man
Thanks man, appreciate it

AlexN09
Posts: 1051
Joined: Sat Jun 11, 2011 7:07 am
Car: 2011 Nissan Altima Coupe S 2.5
Location: Nashville, TN

Post

Irvxing wrote:
AlexN09 wrote:haha no no don't sand it off! It sounds great to me and I wish I had a custom exhaust !!
Too late i have begun :ohno:

No way are you serious??

User avatar
Irvxing
Posts: 545
Joined: Wed Jun 29, 2011 9:48 am
Car: 2011 Altima Coupe 2.5s M/T
Location: Houston, TX

Post

yeah! polished stainless tips are going to be the result

AlexN09
Posts: 1051
Joined: Sat Jun 11, 2011 7:07 am
Car: 2011 Nissan Altima Coupe S 2.5
Location: Nashville, TN

Post

Ohhhhhh yeahh!!!! That's gonna be beautiful :)

User avatar
Irvxing
Posts: 545
Joined: Wed Jun 29, 2011 9:48 am
Car: 2011 Altima Coupe 2.5s M/T
Location: Houston, TX

Post

The4y stand out like a mofo now. :cool:
Image

User avatar
SanoSuKe
Posts: 1704
Joined: Wed Nov 02, 2011 8:26 pm
Location: New Jersey

Post

looks hawttt! now you need coils to scrape that beautiful system! :gapteeth:

oh and as promised here are some Greddy goodness :chuckle:

http://www.youtube.com/watch?v=i0HzR9Oa ... el&list=UL

http://www.youtube.com/watch?v=4RfH2zQL ... el&list=UL

and bonus :squint:

http://www.youtube.com/watch?v=wghZHYFr ... el&list=UL

User avatar
Irvxing
Posts: 545
Joined: Wed Jun 29, 2011 9:48 am
Car: 2011 Altima Coupe 2.5s M/T
Location: Houston, TX

Post

SanoSuKe wrote:looks hawttt! now you need coils to scrape that beautiful system! :gapteeth:

oh and as promised here are some Greddy goodness :chuckle:

http://www.youtube.com/watch?v=i0HzR9Oa ... el&list=UL

http://www.youtube.com/watch?v=4RfH2zQL ... el&list=UL

and bonus :squint:

http://www.youtube.com/watch?v=wghZHYFr ... el&list=UL
Saving up for my wheels first :cool:
Then coils so i can scrape this bad boy.
:dblthumb: Sounds great! :dblthumb: your car it looks sooo....so.... :fap:
lol nice scrape action

aphu
Posts: 537
Joined: Fri Oct 28, 2011 8:57 pm
Car: 2010 Nissan Altima Coupe
Location: Houston, TX

Post

[quote="SanoSuKe"]looks hawttt! now you need coils to scrape that beautiful system! :gapteeth:

oh and as promised here are some Greddy goodness :chuckle:

http://www.youtube.com/watch?v=i0HzR9Oa ... el&list=UL

http://www.youtube.com/watch?v=4RfH2zQL ... el&list=UL

and bonus :squint:

http://www.youtube.com/watch?v=wghZHYFr ... el&list=UL[/q


Go lower!! :)



Go lower!!!

User avatar
SanoSuKe
Posts: 1704
Joined: Wed Nov 02, 2011 8:26 pm
Location: New Jersey

Post

aphu wrote:
Go lower!! :)



Go lower!!!
lol my fenders won't be happy

aphu
Posts: 537
Joined: Fri Oct 28, 2011 8:57 pm
Car: 2010 Nissan Altima Coupe
Location: Houston, TX

Post

SanoSuKe wrote:
aphu wrote:
Go lower!! :)



Go lower!!!
lol my fenders won't be happy
Lol mine areNt happy! Haha


Return to “Altima Coupe (2008-2013)”