evolution brakes on 240sx se...?

[Ali 556]

hay guys...iwwas wondring can a EVO IX cliper+rotor ''bolt on'' on a '95 S14 SE....?

b\c a local guy is selling them for 400$ for all four...so can they fit?....o there to much of fabracting must be done...?

and B4 you say way pay 400$ for evo brakes just go with Z32 brakes....b\c i'm NOT in the US...i'm half wayaround the world....and Z32 are RARE here.....

and just for side note...a friend of mine can get me a 350Z trac edition brembo cliper's and 13'' rotors for 800$....?...so is that a good price.?

thanks for your help....

Regards,

Ali

[Morph]

Just guessing but its not going to be a direct bolt on. Give the guy a bill and take a rotor and a caliper and try to mount it up to see how much fab work is involved. If your running stock rims they probally wont fit.

[Ali 556]

i'll br runnig G35 18'' rims...and the owner is a friend of mine so i can check them with out a bill or anythig......

i just wondring has any one done it B4...?

thanks

[Morph]

i'll br runnig G35 18'' rims...and the owner is a friend of mine so i can check them with out a bill or anythig......

i just wondring has any one done it B4...?

thanks

Not that i've herd but if its your friend try and test fit it. At the very least its going to need an adapter bracket for the calipers.

[adrianfromthecastle]

iirc, theres actually a company that makes a conversion bracket for those brakes on a 240... I remember seeing a thread on it awhile back

[Clawhammer]

I remember something similar but I think it was STI brakes?

[adrianfromthecastle]

nah, I specifically remember reading evo brembos... hmm... maybe I saw the conversion peice on ebay? It was awhile back... I tried searching, but didn't find anything...

either way, $400 for some brembo calipers is a good deal. I'm sure you can find some place to fab up a bracket for you.. or better yet, try contacting brembo to see what they can suggest for you

[ddgsxr504]

Just FYI... G35 Brembo's are a direct bolt on to 5 lug hubbed S14's

Just a thought.

[Ali 556]

Just FYI... G35 Brembo's are a direct bolt on to 5 lug hubbed S14's

Just a thought.

NOT 100% ''direct bolt on'' they need a littil '' massaging'' to make them fit....

driling holes from 12mm to 14mm and driling some were else....

-------------------------- i can't post a link to the "other" fourm...

any way go there and search for "abdul"....you will see what i mean.....

Thanks

Regards,

Ali

[Clawhammer]

Ok I know I'm not really supposed to do this but info is info. My years of lurking weren't limited to just NICO. Anyway my searching lead me to z ilvia and a thread that was in fact about STI brembo's but covers EVO brembo's too.

http://www.z ilvia.net/f/showthread.php?t=93748

Good luck.

[themadscientist]

EVO brakes have a totally different spread for the mounting bolts, I looked at a set and compared them. If you want Brembos just get some GT-R brakes, they bolt right on. 300ZX four-pots would be more than enough in all honesty. If they can scrub speed off that wallowing pig they can sure enough stop a 240 in the blink of an eye.

[Ali 556]

thanks guys.....but i've found a nice deal on 350Z trac edition brembo (all four of them cliper + rotors) for 800$...( is't a GOOD deal?)

all i need is get Z32 SS lines and Z32 E-brake lines too...

thank you all

Ali

[Ali 556]

NO one...?

is a 800$ good price for 350Z trac edition brembo brakes.....all four of them(cliper + rotor?)

help....?

[AmoebAssassin]

Yes, it's a good deal. I've seen them go for 1000 for just the fronts.

[gumby74]

Ali, that thing with the l'il Honda guy is funny as hell. Slow the play down just a little bit though.

[silnismo]

[IMG][/IMG]

all u need is a 1/2 inch thick bracket, drill out holes for the stock mounting holes and then drill holes for the evo calipers to make em fit. stock evo rotors and lines fit like a glove.

im in the process....