enjuku heater hoses

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
cheapscheisst
Posts: 421
Joined: Thu Nov 30, 2006 12:42 pm
Car: 1996 240sx w/ Kouki front end

Post

does anyone know which enjuku heater hose goes on which outlet? they aren't at all similar to the heavy throttle swap FAQ pics. thanks.


User avatar
FSUDrifter
Posts: 1495
Joined: Fri Jan 13, 2006 7:50 pm
Car: trying to decide on one...

Post

i had to cut a little bit off the longer one to get it to fit right, then the diameter is too big anyways for the fittings on the heater core

User avatar
cheapscheisst
Posts: 421
Joined: Thu Nov 30, 2006 12:42 pm
Car: 1996 240sx w/ Kouki front end

Post

which pipe did you connect the longer one to? i can't figure out which one is supposed to go on which pipe.

ser2102
Posts: 434
Joined: Mon Jul 04, 2005 10:51 am
Car: 91 dead. 90 getting did
Contact:

Post

the longer one connects to the pipe thats going towards the driver side. and the short one connects to the one closer to intake mani. i made the long one connect to the top of the heater core, and the short one to the bottom.

User avatar
cheapscheisst
Posts: 421
Joined: Thu Nov 30, 2006 12:42 pm
Car: 1996 240sx w/ Kouki front end

Post

k thanks.


Return to “SR20DET Forum (rear-drive)”