Engine wont rev over 1300 rpm in any gear

The club for Nissan Maxima and Infiniti I30 / I35 owners, and the official home of Maxima Club of America!
SilverMax01
Posts: 12
Joined: Mon Sep 14, 2009 6:34 pm
Car: 2012 Infiniti EX35 AWD Journey - Black on Black

2001 Nissan Maxima SE 20th Anniversary Edition 5sp/Manual

1997 BMW M3 5Spd Coupe - Black on Black

Post

The engine in my 01 Maxima wont rev over 1300. If I hit 1300 in any gear, the car lurches terribly. To drive it, I have to shift quickly before this happens and get to 3rd or 4th and try to keep the rpms down. The fastest I can go is about 50-55 in 5th gear. I havn't had any problems with it til this and have always kept up on my maintenance. Anyone have any ideas or anything to check? It feels like maybe the fuel is cutting out and the engine's choking. There are no codes stored in the ECU. Everything works and sounds fine up until 1300rpm.

Thanks


User avatar
MinisterofDOOM
Moderator
Posts: 30928
Joined: Wed May 19, 2004 5:51 pm
Car: 1962 Corvair Monza
1961 Corvair Lakewood
1974 Unimog 404
1997 Pathfinder XE
2005 Lincoln LS8
Former:
1995 Q45t
1993 Maxima GXE
1995 Ranger XL 2.3
1984 Coupe DeVille
Location: The middle of nowhere.

Post

Make sure all the hoses connecting to your intake plumbing are connected. If they are, you probably have a bad MAF.

SilverMax01
Posts: 12
Joined: Mon Sep 14, 2009 6:34 pm
Car: 2012 Infiniti EX35 AWD Journey - Black on Black

2001 Nissan Maxima SE 20th Anniversary Edition 5sp/Manual

1997 BMW M3 5Spd Coupe - Black on Black

Post

You're right, it was the MAF. I had installed a K&N air filter recently and it looks like the oil on the filter was sucked off and coated the MAF. I cleaned it off with brake parts cleaner and the problem's fixed. I'll be using regular paper air filters from now on; those K&N's obviously arn't good, at least in the Maxima. Thanks for the tip.

User avatar
maxhopper
Posts: 4364
Joined: Mon Nov 10, 2003 10:43 am
Car: 02 Maxima SE 6spd
Location: Kentucky

Post

I changed from the K&N to the AEM dryflow filter.


Return to “Maxima Forum & I30 / I35 Forum”