engine code p1105 in my 98 240sx ka24de

Post by **98240** » Mon Jul 02, 2007 2:31 pm

that is MAP sensor/BARO sensor switching valve circuit malfunction. I am not sure why I am getting this code or how to fix it. I have a 98 ka24de any ideas?

Post by **alms24sebring** » Tue Jul 03, 2007 7:11 pm

same thing on my 97 happened except mine was po105. try a MAP sensor, if u go to a dealership, tell them a boost sensor, that'd be the first thing i would try. ( avg. like $150 for that little a$$ siht)

Post by **98240** » Fri Jul 06, 2007 10:07 am

I dont think the car comes with a map sensor just maf sensor

Post by **alms24sebring** » Sat Jul 07, 2007 8:51 am

its actually "boost sensor" thats printed on it, but same siht. located right in front of the pass. strut tower

Post by **rogoman** » Sat Jul 07, 2007 11:59 am

Check the hoses that plug into the unit for cracks. Also check the electrical harness connector.

Post by **NISTECH** » Mon Jul 09, 2007 5:13 pm

The sensor is not used for fuel control. It is simply used for evap system diagnosis in OBDII

Post by **98240** » Mon Jul 09, 2007 6:09 pm

All of the hoses were plugged in and the harnesses were plugged in.

Post by **rogoman** » Sat Jul 14, 2007 7:16 am

98240 wrote:All of the hoses were plugged in and the harnesses were plugged in.

If the hoses are all OK, then the unit itself is most likely bad and needs to be replaced.

engine code p1105 in my 98 240sx ka24de

engine code p1105 in my 98 240sx ka24de

Re: engine code p1105 in my 98 240sx ka24de (98240)

Re: engine code p1105 in my 98 240sx ka24de (alms24sebring)

Re: engine code p1105 in my 98 240sx ka24de (98240)

Re: engine code p1105 in my 98 240sx ka24de (alms24sebring)

Re: (98240)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums