End of Year SOCAL NICOCLUB MEET... DEC. 13th, 2008 MISSION BAY PARK

[adidas2go]

Jebus! Already? You guys move fast with the G37 f/i

BTW, Im scared to call you now

[Infantry1327]

Stop wasting time on improving the airflow for that G and get the airflow better on my 3.5 A/C. hahaha

[Sentientbydesign]

Blake might be able to take this one for now...But, just wait til we have some time to spend with her...We have some plans to improve the airflow a little bit.

I recently had to help one of your not so happy G37 customers. Having to cut the radiator supports to get the intake installed would have been great info to put in the install manual.

[iiiskylll]

Woooow you guys actually have everything planned out to the T...nice job.

I may have to stop by...

[rjdmmfl1]

Woooow you guys actually have everything planned out to the T...nice job.

I may have to stop by...

Absolutely... we gotta show those East Coast ( New York/New Jersey/ Conneticut) Cats how to put on a REAL car meet, complete with sponsors, gifts, raffles, group discounts, etc....

[Infantry1327]

Don't forget about the december BBQ, beer, and brand new never before seen parts.

[kyle@stillen]

I recently had to help one of your not so happy G37 customers. Having to cut the radiator supports to get the intake installed would have been great info to put in the install manual.

uhhhh....No one else has had to cut the radiator supports, you do need to trim the front core support but that is clearly posted on the website and outlined in the instructions...

http://www.stillen.com/product...202DR

"Recommended installation requires removal of the front fascia clip (not absolutely necessary, but significantly aids in ease of installation) and slightly enlarging the holes through the front core support. Installation time is estimated at two hours for an experienced technician. No other part relocation or parts removal is required."

It is also pretty clear in instruction 8 (photo 5)

http://www.stillen.com/product...t.pdf

[Sentientbydesign]

Hmmm. Must have been a stupid customer then.

My appologies.

[Jose3.5]

Yea, Dec. 13th isn't Christmas but her family gets together for a HUGE party before Christmas. I've been dating her off and on for the past few years and I've always managed to skip out on these parties. They aren't too happy that I might not make it this year hahaha.

I am for sure going to bring the coupe and if Josh comes then he'll probably be bringing either the 09 Maxima or the new G37. We're not entirely sure yet.

I'll drive one of those cars for you guys

[Importroller]

Hey Kyle, I heard you guys are working on an ECU tune for these cars, if you need a Manual Sedan, let me know. you can have my car for a lil while.

[LongBeachCoupe]

g37 or the max... tough decision..I like the G better, but i like the paint on the max better...

[kyle@stillen]

Hey Kyle, I heard you guys are working on an ECU tune for these cars, if you need a Manual Sedan, let me know. you can have my car for a lil while.

Thanks for the offer! I'll let the engineers know. It might be nice to have a manual vehicle to do the final testing. I'm not sure what they have in mind, I do know that it will more than likely be a little while before anything is available.

[adidas2go]

I think the ecu tune would only be a good for the manuals. I believe if you pull the govenor off that cvt transmission its going to overspin and grenade itself. Seems rather risky.

[rjdmmfl1]

I think the ecu tune would only be a good for the manuals. I believe if you pull the govenor off that cvt transmission its going to overspin and grenade itself. Seems rather risky.

U R A DREAM KILLER!!!!!!!!!!!

[adidas2go]

Well, I would say test it for youself. My statement is only a theory. A company also once told me that a turbo system would never fit in the 3.5 CVT engine compartment, and we conquered that

[kyle@stillen]

There are lots of different ways to tune the ECU's without hurting anything. For starters, all cars come from the factory pretty rich...Just by leaning it out and adjusting the timing a little you can gain great power.

[Jose3.5]

So how do these tunes work? can you have a setup for power, another for economy, and stock?

[edonissan13]

this is on a saturday right?

Ill be meeting up with u guys at mainplace, what time though?am i gonna b da only sedan AGAIN

[rjdmmfl1]

this is on a saturday right?

Ill be meeting up with u guys at mainplace, what time though?am i gonna b da only sedan AGAIN

bighercman, importroller, Jose3.5, Damien (from other forums), and you makes at least 5 Sedans that are definately going... Ramon (nissan4life) may come also... you won't be the only Sedan! There's gonna be about 40 or more cars, they definately won't all be Altima Coupes!

[BlackNWhite]

Eddie... we're meeting at Stillen. We are NOT meeting up at MainPlace anymore.

Just a heads up so you're not waiting at MainPlace for like an hour wondering where we're at.

[Importroller]

bighercman, importroller, Jose3.5, Damien (from other forums), and you makes at least 5 Sedans that are definately going... Ramon (nissan4life) may come also... you won't be the only Sedan! There's gonna be about 40 or more cars, they definately won't all be Altima Coupes!

My girl might bring the G down too unless we car pool

[Rob.Vegan]

and still nobody mentions a time to meet up at Stillen...

ill be there around 745 or 8 just to throw that out there. can anyone answer what part we are meeting at ???

[BlackNWhite]

We're meeting at Stillen 8 or 8:30ish. The sooner the better. And it's been stated before that we're meeting in the parking lot at Stillen.

[Rob.Vegan]

oh ok thank you. ya im going to aim for 745 but itll probably be close to 8

[bighercman]

bighercman, importroller, Jose3.5, Damien (from other forums), and you makes at least 5 Sedans that are definately going... Ramon (nissan4life) may come also... you won't be the only Sedan! There's gonna be about 40 or more cars, they definately won't all be Altima Coupes!

Awesome!!! Glad to see that a few sedans will be there. Stillen parking lot at 8? Damn thats freakin early for me. Its gonna take me about an hour or so to get there from Victorville. Oh well, i guess thats the price i pay for living up in the high desert.

[Jose3.5]

I'll probably just meet you guys down in SD because I know I have a hard time getting to places by 8am

[bighercman]

I'll probably just meet you guys down in SD because I know I have a hard time getting to places by 8am

Aw, come on man. If i can make it from Victorville to Costa Mesa by 8 then you can do it from LA. I dont wanna be the only sedan rolling down the 5 going to SD.

[BlackNWhite]

^edonissan13 will be rolling down with us. He's got a sedan.

And Jose, 8 is just the time the earlybirds will be there. I don't think we'll be leaving until about 8:30 or so.

[kyle@stillen]

Let's get a list of all the people meeting up at our facility. I have a neat idea that I would like to try to make work...In case it doesn't work out, I'm not going to tell anyone what it is hahaha. It'll be a surprise...

blackNWhitebighercmanjose3.5Rob.Veganedonissan13adidas2go

[20alex20]

Count me in guys, I'll be there for sure.