"elwesso" adapter plate group buy?

[Adeianos]

I won't be ready for this anytime soon, but could you add me to the list for the next run?Email: [email protected]

[kool-aid54]

sweet let us know.

[Mettler]

A friend wants to dump a VH45 in his Z32, so another adapter plate could be on the cards.

[ISL33P]

do you make adaptors for a rb25 g/box to the vh45 ? if so, how to Oz ?

[WYT R1CE]

I can paypal today If you have one ready. Ready To get this vh on the road haha

[Loch Ness]

so this plate is just like slim's plate if so count me in.

[Loch Ness]

I 'VE BEEN UNDER THE WORLD'S FIRST 450ZXTT MANY OF TIMES JUST PUT 2 WASHERS BEHIND THE FLYWHEEL AND THE STARTER WILL BE OK.

[alvarez6673]

If it is not too late I would like to get in on a adapter plate.

[nooch8it]

Elwesso when will you have a run of these made I have the $ for one now if they are $300 or less and I can even prepay..... I am also working a custom intake manifold that fit a eaton m90 S/C on the vh. The auto in my Q has to go so let me know thank a pm would be great.

[WYT R1CE]

No word from this privacy just gunna order the mazworx

[elwesso]

the major headache I am having right now is the screws... I can have the plates themselves made soon, but the screws are whats preventing me from getting anywhere...

If you guys have any great ideas on where I can get some M14x1.5 flat head countersink screws made that would be very helpful. for the last run, it cost less than $2 per screw including shipping for a run of 350 screws.

[Protune Racing]

Wes i can call a couple of the places around sydney and get them to make the batch if you like. Might even find the same place jason used for the first screws.

email me the specs if want.

James

[Mettler]

Why not look at having them machined in China or something? You don't _have_ to have them done in your country... and being a relatively small package, shipping won't be a problem.

[elwesso]

James if you can find me the info from the one that Jason used that would be fantastic... Send me an email and I will forward you any information that I have that you might like (which is minimal at best).. basically i only know that Jason's "guy" was a friend.

[jeremymr06]

thought id bump the newer adapter thread instead of leaving the old one at the top. are you having any luck with finding the bolt?

thanks

[kool-aid54]

Super bump, tax money comin want to spend it on swap.

[s13lover1]

Bump want to buy the adapter as well should have money coming soon if its around $300.

[ultrapulse]

I would be keen on just a plate if you can't find screws yet have one to sell. I ordered mine off-the -shelf here in hamilton NZ with no issues...apart from them being a bit more on the $$ side than normal.Would you post off shore Elwesso? It just requires another customs form to be filled out.

What weight is the plate? Will check with USPS as they seem to be always cheapest via my ebay purchases

[ultrapulse]

I can try and source some bolts if you'd like Elwesso. What length are you after? Then I can get a price to you.

[elwesso]

I dont remember the exact specs, but they are something like 50mm long (just under 2 inches).

If you could source some that would be fantastic... If that works out I'll have one of my friends help me make a run of plates.

[s13lover1]

Just wondering how far is the progress on this since the last post?

[ultrapulse]

Hi Elwesso, sorry about the huge delay. I forgot and are too busy to check posts that often. Anyway, do u want the bad news or the bad news. I was mistaken and used hex head ones last time, and the fittings place that 'had them over the counter' doesnt do the countersunk socket type in M14 metric fine. Sorry bro.

[newbissan-tech]

wes if your buddy can make the plates he should be able to make the bolts from raw materials and then have them hardened or just make them out of what ever material you wish! just a suggestion! any cnc lathe or milling center can perform this task!

[Florida240sx]

Wes I still have the plate I got from you if you have anyone interested in buying it. Still in the box you sent me, I never opened it. My project has been held up for awhile now and not getting to it anytime soon.

[Florida240sx]

http://www.hudsonfasteners.com/01_custom.htm

[elwesso]

send me an email, at the very least I'd like to cut a template... I'd REALLY appreciate it!

[91z]

elwesso, tried to email you to get info on these adapter plates. Do you have any available or is there another group of them being made anytime soon? Let me know, I really would rather use yours than Mazworks.
Thx!

[91z]

Flordia240sx, I would be interested in that plate you have if you still have it for sale. Let me know, either by PM or email (kluesner_patrick@ hotmail.com)

Damn, cant they default PMing to "ON" by default? Nobody here has it enabled!

[Florida240sx]

Wes has the plate back to make another batch I believe. So where you at????
I'm trying to decide to build my 240 or get a bike. Got some family issues going on right now so things are on hold

[LEMHEAD16]

I think I still have a few of the bolts extra if you need an example Wes.